Just got off phone with daughter and she informed that granddaughter has a great wish for a doll bed for a doll of current fashion, 18"" tall. Anybody got a picture of a doll bed? Left to my own devices it will take 2 months to come up with a vision of what a doll bed will look like. If I can get by that part I can get it made in time.
I built a doll bed for our oldest daughter when she was a little girl. The bed was a replica of a Shaker-style bed I made for her when she first graduated from the crib.
I wish I had a photo, but basically, it was four legs with Sheker-style finials, a headboard, a footboard and rails around. You can figure it out. It wasn't quick or primitive, but it was perfect for the occasion.
I don't have a picture either, but I made two years ago for my niece and the child of a friend. The beds were about 24" long and 12" wide. They were wider at the top. Solid ends and mounted in a frame so they could swing. The frame was like the legs of a trestle table. The sides of the beds were open with pickets and rails. the Hard part for me was to get the cushions made. In both cases, the young ladies played with them for a few days and moved on. Come to think of it, my sister and BIL adopted a young fellow and they got him rater suddenly and were not ready. He slept in the doll bed for a day or two. More success than I expected.
I MIGHT be able to get a picture if you want one, but it would be like pulling teeth.
A good friend finished his daughter's doll bed with Deft. They got back from a vacation, and the dolls foot had "melted" and was stuck to the foot board. I'm just relaying what he told me, can't give you details about curing time or other details. I just remembered him telling me the doll required a minor amputation.
I suspect the pasticizer in the foot dissolved the lacquer. I will likely use conversion varnish or paint it. Younger daughter is an artist and she may wish to paint some decorations on it and make it a family present.
It is for that marketing blockbuster American Girl doll which she bought with her $100+ dollars of saved money which emptied the piggy bank (actually a post office bank). . At least she will settle for a home made bed for it. On could invest the cost of this American Doll accessories and pay a year of college.
This is a template I made from a plan I saw somewhere (don't ask me where, it was years ago). I'm sure you could easily redraw something like this with a ruler and a compass. I guess this is a cradle and not a bed. The sides were angled, you can kinda make out the alignment lines and drill points. I just made 2 finished pieces for the ends, cut some straight boards for the sides and added a bottom. Only tough part was mitering one edge of the sides to fit to the bottom. I think I did this before I had a bandsaw and it was just one afternoon. Screwed/glued it together and put some decorative pegs over the screw holes.