Anybody making Christmas presents?
Ellis Walentine
I figured we would have some nifty gifty stuff showing up here about now. Anyone working on gift items that might inspire the rest of us?
Ellis
Knowledge You Can Build On — Est. 1998
Anybody making Christmas presents?
Ellis Walentine
I figured we would have some nifty gifty stuff showing up here about now. Anyone working on gift items that might inspire the rest of us?
Ellis
Re: Anybody making Christmas presents?
Tony-Memphis
I normally work until the last minute and decided not to get myself into that corner this year, so I am only making one. My trainer collects nutcrackers, so I am building him a weight lifter nutcracker. Sorry, but I think nutcrackers are ugly, but it has still been a fun project. Parts are all done and mostly painted, so I shouldn't be in too much of a rush to finish it.
Tony
Re: Anybody making Christmas presents?
Joe in a Cleveland suburb
Hi Ellis. Hope all is well.
I'm making rolling pins for my nieces. I've never done this before (i.e., made Christmas presents for family members). Christmas dinner is at my house this year. The whole FamDamily will be there - too many people, it will be one big Mell of a Hess. 
I thought it would be nice to give all the nieces something; they are all newlyweds. Maybe I'll get a few extras done for the moms too.
I'm sure they all have rolling pins already, but none of them have one made by their favorite Uncle... 
I've been using left over cut-off pieces of Cherry that started life as table legs. I have 3 done so far and a few more started using Walnut.
I am not a turner by any stretch, but thanks to the fine folks over on the turning forum, it has been easy to do.
cruddy cell phone pic:
Re: Anybody making Christmas presents?
paul in AZ
A jewelry box out of cherry with a center lid panel of lacewood edged in maple for my daughter.
These were cutoffs from a lacewood hallway table I gave them last fall as a wedding present and a cherry table I built.
I'm also throwing in a cutting board of maple, cherry and walnut.
Just scrap woods made quick and easy for the hell of it.
Re: Anybody making Christmas presents?
Bill Howatt
Couple of 12" maple bowls for my 2 sisters. Wood came from our uncle's property about 3000 miles from them.
Bill
they look as good as the ones in the craft stores
Just started a little Kitchen Island
Keith Newton
No pics yet, but we had our family Thanksgiving gathering down at Frogwarts. I had been saying for several years that I planed to do one, but met some resistance, that it would make it feel too tight. However, we needed more workspace, and I had my little job site workbench next door under my cousin's cabin, so I just brought it over. Immediately, they all tried to lay claim to it, which isn't going to happen, but it really helped to establish the best size for that space.
One of my sister's childhood friend/classmates recently bought one of the oldest homes in our little town, just a block from the Courthouse. He mentioned his intent of taking a Cedar down which was too close to the foundation, and touching the slate roof, so I got it, and ran it through my sawmill. Nice to have this lumber stash to use with no cash outlay.
I'll put some pics together as I get it finished.
Re: Anybody making Christmas presents?
Joanne in Point Pleasant, PA
I just made a wall clock from a piece of elm for a grab-bag event. Sorry--forgot to shoot a picture before I gave it away. It was an interesting slice of elm and I cut some disks from a walnut dowel to embed as markers at 12, 3, 6, and 9. I have a cabinet full of clock parts from my Dad, so I'm trying to use some. I'm working on one with a pendulum for a wedding gift. I'm in the middle of a new sideboard for Mom and will make a new lamp for my sister. For friends I am thinking of trying some wooden spoons (I've done cutting boards and bread knives). Someone requested a new garden bench as a gift and someone else wants me to make her a yarn swift. And I am still thinking of how to turn an old snare drum into a table with a glass top for someone else.
Deadlines, deadlines . . .
Steve Mackay
Pushing it, but only one more sanding, final finish, then go get glass.
I'm not a "cabinet man" and I don't like doing flag cases. Let alone with this box thing added on. But was a new adventure. Aunt Marry's husband passed (USAF Vet.) and Ol' Steve opened his mouth. 

oven rack tool
clay foster
This is what some people will be getting. I've seen them made from a flat stick with a notch, but the turned version is a little more elegant. There's even magnet to stick it onto the side of the oven so it's handy.

Re: Anybody making Christmas presents?
Bryan Cowing
I'm making 2 texas style porch rockers in kid size. Two next door neighbors with little girls, hopefully need a rocker to rock their dollies to sleep.
slats and finials next
This is a "gag" gift that I dreamed up.
Terry Alexander
Feel free to copy this idea. The "stick" will fit in an 8 1/3 x 11 envelope along with the letter. I don't know how to insert a letter, so here is the text to the letter.
“The Stick”
Yes, you are the proud recipient of a scientifically engineered “stick”. The stick is precisely 1/4” in diameter and 6” long. Take good care of your stick as moisture can change the engineered properties of the stick.
There are many uses for the stick. You can use it to prop open that window in the summer. Research (ours) suggests that 6” is the preferred distance for getting just the right amount of breeze. You can use your stick to make 1/4” patterns on most any object. It can be used to reach those difficult “itchy” places (cleaning may be required afterwards). You can store the stick outside your door and it is GREAT for removing stubborn mud off the bottoms of shoes and even dog poop (REALLY suggest cleaning after this use). The stick can be used as a rolling pin….for biscuits. It can be used to discipline unruly children….especially those that are not yours! Cut a 2”x3” piece of cloth, staple it to the end of the stick, and you have 1 piece of equipment needed to play capture the flag.
When you have exhausted uses for your stick in its engineered form, now the fun begins. Sharpen one end of the stick to a fine point. (Disclaimer….not responsible for eye injury or trips to the emergency room). Hold the stick firmly in your hand and start running. See if the stick pokes your eye out. Now, we find this virtually impossible. The stick could poke you in the eye, but for the stick to poke your eye out it would have to come in behind the eyeball and with some kind of leverage, “pop” the eye out.
The next time somebody says: “That’s about as much fun as sticking yourself in the eye with a sharp stick”. Well, pull out the stick and say: “Let’s just find out”.
Your now sharpened stick can be used to roast marshmallows over a SMALL fire. There are 2 children in the Baylor burn unit who tried this over a bonfire. Not recommended.
These are just a few uses for the stick. We hope you enjoy it and get many years of practical use out of it.
Clay
Dustmaker Mike
could you give me some dimension on these please? I am going to try and make a few of these this weekend. Thanks
Clever !
Re: Clay
clay foster
Sure. They are about 12" long, and 1 1/4" in diameter. The flat part is 1/2" thick.
The notch is 3/4" diameter. I use 3/8" diameter rare earth magnets epoxied in a hole that leaves the magnet just a little bit proud of the wood.
Thanks
what a fine neighbor!
Re: Anybody making Christmas presents?
charlie belden
What a wonderful gift - of your time, knowledge and skills. And the reward, though I'm sure that wasn't anything you even considered, will be the wonderful memories these rockers will create for two little girls, who grow up way too fast.
I believe the Aussie phrase "Good on you mate" is very applicable in this case.
We so often hear about the A-Holes. But there are far more Angels Than A-Holes - and you proved it. Your wings may not be visible - but they're there. Thanks for the reminder.
Re: Anybody making Christmas presents?
Bryan Cowing
One assembled & waiting for finish 

Re: Anybody making Christmas presents?
Joe Bradshaw
A few Christmas presents completed in the last month. More in the pipeline.
Joe

WOW
Bill Tindall, E.Tn.
I'll bet friends and relatives are anxious to get on your Christmas list.