Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Vac hookup for PC Plunge router

Posts

Vac hookup for PC Plunge router

#1

Chris Groves

Vac hookup for PC Plunge router

Chris Groves

I am using my Porter Cable router with a new Mortising jig that I made recently and love using it for making quality floating tenon joints up to 3/4 inch. But I would like to clean up the process with vacuum using my existing PC base and router. I do know that some of the newer router have great vacs.. esp the 2 bigger Festools... but i do not have that in the budget

have anyone modified their plunge routers to add a vac pickup?

Chris

Re: Vac hookup for PC Plunge router

#2

Re: Vac hookup for PC Plunge router

Larry in nw ohio

Chris I have had my hand held routers hooked up to my Vacs for years, I just can not stand having it throw saw dust all around and then have to pick it up. I also have an automatic starter hooked on it so the vac starts and shuts off with the router. Larry

Re: Vac hookup for PC Plunge router

#3

Re: Vac hookup for PC Plunge router

Joseph Mulherin, sr

Chris, years ago I made a new base for my router which fit the Craftsman router, and it had an extension out to the side that a vacuum hose was mounted on. I added a fitting on the board which marched the hose

and had very good luck capturing all of the shavings....very little escaped. The board was flat...like two saucers attached together.

Re: Vac hookup for PC Plunge router

#4

JL

Re: Vac hookup for PC Plunge router

JL

I have a DC stand. It has a 4" connection and I can mount any hood or nozzle that takes a 4" connector. For serious routing or sanding, I use that. Ordinarily however, I let the chips fall where they may.

Re: Vac hookup for PC Plunge router

#5

Re: Triton has built in shroud for vacuum

Don Evans

The next time a new router is in the budget, take a close look at the Triton. They have 2, one is 2 1/4 hp and other is 3 1/4 hp, they both have built in dust collection that works extremely well when connected to a vacuum or a dust collector. Both also has built in raise and lower with handle when mounted in a table, they both plunge and built in collets that take only one wrench to work them.

I really don't understand why this router isn't more popular in USA except that when someone ask what router should I buy everyone will recommend what they have which I quess is mostly Porter.

Mine has been working great for several years and I'll buy another when the time comes.

I have no affilation with the company, it's Australian and the routers are built there.

I fear they will stop making them unless more people catch on to them.

Don

Re: Vac hookup for PC Plunge router

#6

Chris Groves

Re: Vac hookup for PC Plunge router

Chris Groves

Does anyone use one of the Festool Plunge routers.. I have their track saw and 2 tracks so when I upgrade from my trusty older Porter Cable I probably should go that route... esp if I could find a good used one.

Thanks for the input ... I will try making a base with a dust port and see ho that works... My router is on a sled on this mortise jig so I have plenty of space to mount a small dust collection manifold.

Re: Vac hookup for PC Plunge router

#7

Ellis Walentine

;Not sure which PC router you have...

Ellis Walentine

... but Porter Cable makes a variety of snap-in and add-on dust shroud accessories for a lot of their routers. I'd check on that first.

Ellis Walentine, Host

Re: Vac hookup for PC Plunge router

#8

Chris Groves

Re: ;Not sure which PC router you have...

Chris Groves

I am using a Porter Cable 6902 Router with the 6931 Plunge base

Re: Vac hookup for PC Plunge router

#9

Re: Vac hookup for PC Plunge router

Merle

I have a Festool OF 1400 and have found the dust/chip collection to be excellent. They have 2 attachments, one for flat surfaces and the second works in conjunction with the first one for edges. HTH

Re: Vac hookup for PC Plunge router

#10

Re: ;Not sure which PC router you have...

William Duffield

You can get a plunge base or a fixed base with a vacuum connection for a P-C 890 series router, but Porter Cable does not manufacture them for the 690 series routers.

I've built dust collection enhancements (or jigs, or fixtures, or whatever you might call them) for applications using the 690 fixed base, but not for the plunge base. I can't tell whether the ideas contained within them would be of any use to you, because I would not use a plunge base for either of these applications.

Re: Vac hookup for PC Plunge router

#11

Re: ;Not sure which PC router you have...

Kurt

Porter Cable used to make a base that had built-in dust collection for the 690 series machines. It was discontinued years ago, unfortunately.