This past weekend was a nice long weekend as I took some time off work and the LOML and I went to a cabin in the Ozarks on Thursday, Friday, and Saturday. This was a slightly early celebration of our 30th wedding anniversary. Our real anniversary date is Dec 3, but the LOML will be staying with her mother while recovering from back surgery. This will be the longest time that we have been apart since we married. Tending to the needs to 2 widows does take a toll on a person and family, but it's the least we can do for our surviving mothers.....tend to them and help them as much as we can/when we can. Anyway, the LOML and I had a really nice time as we just goofed off a bit, rested a LOT, and slept a good bit as we were both exhausted from all the other things weighing us down. It was truly nice to go to bed early and sleep late all in the same 24 hour period.
I go back to being oncall as of this morning, so we all know what that mean for me this week.
I worked with my SIL on his new garage, shed, workshop or whatever it ends up being. We did some some of the wiring, something I have been doing the last 3 weeks when I have time. I really enjoy doing electrical work, I just wish I could be better at it. Everyone have a good week. Larry
Toiled away at trying to refinish 50-year-old stairs that had never seen a lick of maintenance. Huge amounts of sanding and scraping and still the results when I tried to stain the treads was extremely disappointing. Three of the treads that I had to remove for other purposes and ran over the jointer stained and finished beautifully but the other nine are just plain ugly. Even vertical-grain heart pine can only take so much abuse and getting the old spar varnish out of all the pores was impossible with mere hours of sanding so I've got blotchy color and three coats of poly didn't make it any better, just a bit shinier. Too bad though, I'm going to go ahead and paint the stringers and risers today and just live with it for now since the carpet installers are coming to do the library/gallery on Wednesday.
Did ya ever go to a woodworking show? Have you wished to find many of the tools, accessories, pieces you wanted at 1/10 the cost of the catalogs? I found such a place this weekend. The ad read “Estate Sale…woodworker’s…lots of tools, don’t miss this one… Open 7:00A - 3:00P…”. I got there at 6:30A, jet dark. I couldn’t find a parking space, the streets were clogged with cars. When open the place was mayhem, people everywhere in four basement rooms. The big stationary tools just sat there – Shopsmith, saws, router table, sanders, dust control, drill press. Hand and power tools all out on tables. All well maintained, not all the best tools made, but not a speck of rust. Jigs made with Rocklear type hold downs, miter slides, measuring tapes. Scattered throughout were many dozens of plastic boxes, stacked neatly on shelves, all labeled. Plumbing, woodworking accessories, electrical, automotive, magazines, hardware, garden, data sheets and manuals. In the rafters and on benches were mouldings, lumber, clamps, vises, sharpening. You get the idea. I didn’t expect it but once there I couldn’t make myself leave. Bottom line is I spent $187 and figure I got value at four times that in stuff -- cherry picked 18 - ½” name brand router bits, 100 feet of 10/3 wire, 250 feet of 12/3 underground wire, 8” horizontal wheel sharpening system, new Starrett 18”,12”,6” hardened rules, also screw thread gauge, 3” engineers square, dial indicator, and magnetic stand., Kreg drawer slide accessories, Jasper circle jig, dowel plate, microplanes, 12 Jorgenson 4-6” and 8-12” lightweight metal screw clamps, Jevons right angle clamp plates, a miter gauge and miter bars. I did fine, but who knows what others found – they sure had enough to search through. As always, I made it a point to find the seller and tell him that the tools would be used and not resold. I find that that effort sometimes helps when people are selling a lifetime collection of stuff. I find this type of possibility maybe once every couple of years. Saturday was good until 2015.
It's that time of year again, all my hand tools were packed and placed into a storage place with heat, the machines were preped for a long winters nap, just some cleaning up to do before I close out the lights till spring..
Met up with some woodworkers,,,, if Beavers count. *LINK*
Keith Newton
Otherwise, I went for a long paddle down a beautiful lazy creek, and enjoyed the early fall. Right off, I picked up a beaver escort that swam along with me slapping his tail. I'm pretty sure he wasn't announcing to his fellow critter, that "Here comes the great woodworker Keith Newton" but the though was entertaining in my mind. ha
The temp had dropped into the upper thirties by morning, which cause a fog to rise, and turned the distant big old cypress into ghost trees compared to the close ones. As I slipped silently along, I managed to get inside of 30' of a lot of interesting critters, like River Otters, Weasel, turtles, 3 Alligators, two of which were very large. They were basking in the Sunlight as the morning warmed up, and I was hugging the side of the channel using clumps of cypress trees wind-shadows to avoid paddling into a headwind. The Gators were all behind large trees which I appeared out from behind silently.
The first was up on a little island about the size of a truck-bed, and I was about 16'~20' beside it, when that log raised up, ran about three steps, and launched out in front of me doing a belly flop, along with an incredibly powerful tail thrust which sent waves large enough to slap the side of the canoe hard enough it made me wonder if it had bumped the underside of my canoe, because by then, I was crossing his bubble stream.
To say the hair on my neck was standing up from the exhilaration is an understatement, and I'm totally incapable of stringing together any superlatives to convey this instant. I will only say that it was not fear, because while I knew it could have had me, by the time it launched, I knew I had startled it more than it had me, since it was launching ahead, rather than at me.
It happened so fast, that I had forgotten that my camera was in my lap, with the strap captured by my chest shirt button. Oh well, I was happy to be alive, and there at that moment.
I hadn't gone far enough along for my hair to settle back to normal, when suddenly there was another even larger one, over 10', basking in a floating raft of Alligator weed. I was about 20' away, trying to get my paddle across my lap, so I could free up my right hand to get the camera up, when the water around it exploded. My oh my, can it get any better than this? Well, my camera battery was dead, so I only have memories.
I have been wishing for one of those GoPro Hero 3's, now this is really adding to my desire. If I had been wearing one on my head, I could have captured it in hi-def video.
I even paddled within 6' of a third, but much smaller gator. As I passed I could see that it's eyes were closed, so I put on the brakes, and managed to get a pic with my iPhone.
Here is a link to a few pics on flickr, best viewed in full screen. thanks K
Man, I'd love to get my canoe in the water down there. What a beautiful area. Love the reflection shots. I was out on Saturday on Lewey Lake and the Miami River in the Adirondacks but it was much different. Thanks for the pictures.
I live near Pittsburgh. A history as a "working class" type of town. Residents are getting older, but before that they developed a mindset (if not always the developed skills) of making things they needed. Pure chance of location - and a thriving group of estate clearance businesses.
This is the closet I opened up and remove all the crumbling plaster. I replaced it with some leftover Ash flooring. In the summer when I don't need the wood in the house it will be used to store winter jackets.
The walls still need work but that's winter work.
We've been upgrading the insulation in the house.
As you can see the insulation on the ground doesn't equal the missing insulation in the wall.
Last weeks work
This weekends work, I still need to replace the posts and the deck at the front door.
I went to Albuquerque Thursday to pick up a huge crate containing a secondhand (or maybe third or fourth ) Terrco carving machine.
Got it all assembled and running over the weekend and did a bit of test work with it. There is going to be a learning curve, but I'm very optimistic.
I wanted to do more carving work Monday, but instead had to deal with 5 truckloads of crushed rock being delivered and spread on the very rutted driveway. The section of US 54 going through town was re-built this year, and the construction company is selling their surplus base material on the cheap - delivery included. We got very lucky in the truck driver, he's quite the expert at smooth spreading using a dump truck, so I only had a little hand spreading and raking to do.
Longer than most people's weekends Mine run Thurs-Monday, so it was back to work for me yesterday.