Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Old craftsman shop vac needs parts

Posts

Old craftsman shop vac needs parts

#1

Old craftsman shop vac needs parts

Karen Haas

I come upon this item for free and I need one very rarely, so don't want to buy new. It is missing some parts, like the car cleaning kit (hose, etc) and it is missing one wheel. I cannot locate the model number. I am wondering how to proceed? I called the sears parts department from their website and the lady sound without the model number she couldn't help me. I am going to head down to sears and talk to someone in the tools department and see what they say.

The wheels on the front are the rotating kind and the 2 wheels on the back, of which one is missing is different. The wheel is held in place by an axel, so to speak, and only rolls front to back. It's plastic and about 4 inches round. I see on the newer models all for wheels are the rotating kind.

Re: Old craftsman shop vac needs parts

#2

Ellis Walentine

Generic parts

Ellis Walentine

You should be able to get generic casters and hoses, etc. from someplace like Home Depot. I wouldn't try to get parts from Sears; it's likely to be a waste of time.

By the way, those old Sears shop vacs are real icons. They are louder and more powerful than most of the shop vacs made today. Wear your ear plugs.

Ellis Walentine, Host

Re: Old craftsman shop vac needs parts

#3

Re: Generic parts

Larry in nw ohio

Could you post a couple of pictures, especially where the parts are missing. I have hoses, but it probably would cost as much for postage as to just buy them. Where do you live would help, that way if someone lives close and they had something you could use, they could just drop it off. Good Luck. Larry

Re: Old craftsman shop vac needs parts

#4

Likely has a 2 1/2" hose

Gary Smyth

Find a conversion piece of plastic that converts a 2 1/2" to a 1 1/4" diameter. Used with a new filter (which I'm pretty sure Sears still stocks--and so do big box stores. It will substantially increase the suction. Once that is done you can hit any number of places for the hose. Make sure you get the proper ends which on mine are rubber sleeves.. Right about now you could visit a swimming pool place and maybe get a end of season deal. I got a 20' hose for about $10. As to the wheels, find other than Sears wheels with the same size as the axle shaft. Harbor Freight has a number of wheels on sale so you may get lucky. You can check online. Pictures will help and perhaps get you a model number. I agree about the noise. Sound deadening ear muffs should be standard for the old Sears vacs.

Re: Old craftsman shop vac needs parts

#5

Re: Generic parts

Karen

Thanks everyone. I've gotten some good ideas. I tried to upload photos, but failed so I gave up. There is a Harbor Freight near me, I'll go over there. Getting a hose from a pool supply place, genius!