Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

19 Aug 2013

Good Morning Everyone,

I find it hard to really believe that this is mid-August and it is 63 degrees here this morning.!!! We've been having some really nice and cool temps for the past week or so and boy has it been nice.!!!

Been working some more on the inside of the house. We still have a bit more to do but we aren't really working as hard on it as we should. It's really easy to get burned out on your own remodeling stuff. The good news now is that I finally got working parts for my home computer and it is alive once again. Good thing I had good backups of my stuff. :)

Well, that's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

gimpy

Hello, Well we got up Sat morn, wife was gonna clean house, I told her I was gone to work in the shop, ended up in the garage....she came out and said, I THOUGHT you would be in the shop.....I said "I AM" oops,..ya see, I have my shop full which is in the basement of the house, I'm starting to get over flow....Heeee, so, I got her to help me move an air compressor, and left her do the wiring, while I'm there.......that way she can say she helped............Sun, went to church, went for dinner, had the granddaughter, had a lot of fun with her till she fell and hit her head, now she has a shiner.........then finished the night out watching little league baseball, thanks for asking

terry

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

Mike Foster

Spent the better part of the weekend unstacking 5/4 maple from my stash in the field and dressing 2 sides to a final thickness of a full 4/4. 160 bd ft of maple now sitting stickered in my shop waiting to become my pantry. Just stacked it tonight. That's a lot of maple. Probably way more than I'll need, but it will find other uses.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Kevin French

We spent the weekend inside installing trim, painting...

But we did take some time to go to the Wendell Old Home Day celebration after which we snuck up some Chicken of the Woods, very good eating.


img

Re: WC Weekend Accomplishments....

#5

a nit pick of lumber nomeclature

Bill Tindall, E.Tn.

4/4, 5/4, 8/4 etc has special meaning in describing hardwood lumber. It describes the thickness that the lumber was sawed to at mill. This "code" has no other meaning and should not be used to describe any other lumber thickness. Correctly used the "quarter" description is used to specify sawing instructions or to describe the history of what the board had been sawed to. Downstream of the mill inches are used to specify thickness, not the quarter designation.

To provide an example..... you instruct the mill to saw a log 4/4. The log will be sawed into boards 1 1/8" in thickness. The 4/4 description provides no information on the thickness for the rest of the board's life. After drying it will be something less than 1 1/8" depending on species and grain orientation. After planing it can be any thickness and this thickness must be specified in inches. For example, if the 4/4 board was dried then planed and advertise for sale the planed thickness might be advertised as skipped dressed to 1", or S2S at 13/16".

Sawmills prey on inexperienced lumber buyers. Speaking their language precisely will make them more cautious about trying to give you a good deal on some "excellent" gum. (long story but black gum is so unstable that as it dried the warping boards lifted the 500 bdft stack of walnut that was on it. And then there was the interlocked grain that rendered planing impossible. It did look pretty off the saw).

Re: WC Weekend Accomplishments....

#6

Clint Searl

Nit pik the nit pik

Clint Searl

The woodworking community knows that lumber at the dealer that starts as "4/4" at the sawmill ain't necessarily one inch thick. If it's off the saw, one inch is probably pretty close; if it's surfaced, it'll be something less; but 4/4 is a convenient reference designation that's commonly understood. So, to impose a rule that limits "4/4" usage to sawmill jargon is both arbitrary and affected.

Re: WC Weekend Accomplishments....

#7

I have to agree...

John in NM

4/4 is, to me anyway, just another way of saying 1 and as valid a manner of describing thickness as 1/4 or 3/4.

While the casual woodworker may well profit by acquainting themselves with the wily ways of sawmill operators, most of us seem to use 4/4 in just the way it was used in the OP. Is any change really necessary?

Re: WC Weekend Accomplishments....

#8

Mo' nit picking.

basil

I thought black gum was a member of the poplar family. I know that what I have sawn has been similar in character and such to poplar....now sweet gum is another story.

Re: WC Weekend Accomplishments....

#9

Re: I have to agree...

Jerry Gibbs

I thought I had to talk in quarters to sound like a woodworker.

Re: WC Weekend Accomplishments....

#10

yes, well a conditional yes

Bill Tindall, E.Tn.

"Is any change really necessary?

If you ordered "200 bdft finish planed 4/4 oak" from us (or any other dealer) the truck would arrive with 200 bd ft of oak finished planed to 13/16". If you ordered it skip dressed it would arrive at 1". If you wanted the lumber "finished planed at 1", 5/4 oak would be pulled and planed to 1" per the order specification.

All this may be of no interest, or relevance, if you are buying a piece or two of lumber at Woodcraft. But if you ever decide to buy a quantity from the place where your local woodworking shops buy you need to know what 4/4 means in the trade, or doesn't.

Re: WC Weekend Accomplishments....

#11

Re: Mo' nit picking.

Yonak

Sweet gum and black gum are related, but not closely, and they share the interlocking grain characteristic. Black gum is also known as tupelo and, sometimes, bay poplar, and is popular with carvers, as is yellow poplar. Black gum is half again as dense as poplar and about the same density as sweet gum.

Re: WC Weekend Accomplishments....

#12

However...

John in NM

Mike was not talking about ordering lumber from anyone, if he had been I would probably agree with you.

For what he was discussing, the difference between saying "planed to 4/4" and "planed to 1 inch" is irrelevant. Both are measures of thickness readily understood by those reading here.

Re: WC Weekend Accomplishments....

#13

Re: WC Weekend Accomplishments.... *LINK*

Keith Newton

I was trying to get doors and drawers made for the cabin on Saturday, so didn't get down until Sunday morning. Benny and I managed to get the drain and water lines run to the kitchen sink. On Saturday, he had managed to get the fridge and stove hooked us, so now there is a functioning kitchen to celebrate.

After everyone left on Sunday, I grabbed a beer and settled down in a swing under the Sunroom. The light was really nice, and as I looked out at the canoe, I was reminded of many great outings that I had taken in that canoe, yet the subject was always something else, rather than me in my canoe. I grabbed my camera, and started taking various shots, while Sass was trying to interest me in playing with a ball. After a bit, she cracked me up with a Chewbaca from Starwars sound. She seemed to know that whenever I grab the camera, she needs to either become the subject, or she is going to be left behind. She seemed to be coaxing me out onto the dock, so I followed, and then she surprised me by hopping over into the canoe, and settled in waiting for me to come take her for a paddle. Normally, I can not call her to come get in. I can lead her by the collar, and she will jump in, but this is the first time she initiated it.

So I accepted her offer, laid my camera on the dock, and stepped in. As we pulled away from the dock into more open sky, the lingering clouds were peach colored, reflecting off the water completing a wonderful scene. Sass was very calm, just laying there on the foam block that I keep for her to lounge on, and can see out.

We had not gone far, when a big hog grunted out in the woods on the far shore. She perked up and ask "what was that?" It was a wild hog, I said, and something you need to watch out for. She held her nose high sniffing the air for a clue "No I don't think so" she said. Well,,,,,,,,,,, If it wasn't, it was an Alligator, and a damn big one at that,,,,,,,,, your choice. Long pause,,,,,,,,,,,,,. I could tell she was worried, so I added. You know, I can out paddle a swimming hog, but not too sure about a big gator. Either way, neither wants to deal with a grizzled old cuss like me. But you on the other hand, with your strawberry blond coat, look like a caramel pudding to a gator, and alligators like to have their desert before their main course. She had been resting her chin over the gunnel, but then quietly slunk down more.

Here is a link to some pics of Sass, the dock, and canoe.


http://www.flickr.com/photos/7391658@N03/sets/72157635179703856/

Re: WC Weekend Accomplishments....

#14

Re: WC Weekend Accomplishments....

Bill Tindall, E.Tn.

what is that green thing in the stern of the boat where the cane seat is supposed to be? Wouldn't be the equivalent of a three wheeled Harley would it?

Re: WC Weekend Accomplishments....

#15

Re: WC Weekend Accomplishments....

roger lance

I had a golden with the same coloring as Sass. We were best friends and I still miss him.....enjoy your times together.....its a special relationship.

Re: WC Weekend Accomplishments....

#16

Re: WC Weekend Accomplishments....

Keith Newton

Bill, I should have known that I'd be setting myself up for some ridicule with that plastic chair. But my joints have gotten to stiff to sit on those low seats, for as long as I like to be out sometime.

I really ought to build myself a nice wooden boat, and maybe I will someday. Usually, that chair is well forward of there when I'm out alone, for better hull trim. I'll have to say, it is darn comfortable, and easy to propel.

Re: WC Weekend Accomplishments....

#17

Re: WC Weekend Accomplishments....

roger lance

Its also a little dangerous to raise the center of mass up that high in something as tippy as a canoe.....gators you say?!

I'd be considering a 14' row boat with an electric trolling motor.....a lot more stable.....could get a nice padded swivel seat with arm rests.....and very quiet....just a thought.

Re: WC Weekend Accomplishments....

#18

Re: WC Weekend Accomplishments....

Bill Tindall, E.Tn.

It's not likely one will abandon a canoe as a mode of water transportation after a life time of paddling........even if it needs the "walker" accessory.

(Just remember to remove the chair before pictures).

Re: WC Weekend Accomplishments....

#19

Ellis Walentine

Nice haul


Re: WC Weekend Accomplishments....

#20

Re: WC Weekend Accomplishments....

Jerry Roberts

Gosh, that canoe takes me back to years gone by. That's not a Grumman is it?I was paddeling a canoe before I could legaly drive a car. I eventually got a 4 horse Johnson and hung it on the side stern. That way if a storm came up I could get back quicker. I had a dalmation I took with me sometimes. One time she got excited on almost pulling up to shore and she tried to get out and we tipped over but it was only a few feet from shore .

Re: WC Weekend Accomplishments....

#21

Yes it is a Grumman

Keith Newton

It is really well built.