Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Chewing-gum for the mind. *LINK*

Posts

Chewing-gum for the mind. *LINK*

#1

Chewing-gum for the mind. *LINK*

Keith Newton

I have always liked the idea of working some details of nature into my work, and have been giving this some thought. Well, since I seem to be developing a little talent as a macro nature photographer, I am fascinated by Dragonflies, and especially their eyes. A google search will usually render an estimate of 30,000 facets, although that might be close for the big Green Darner, which I have included one of here, but probably about twice what a Wandering glider would have, being smaller, and with much larger facets on the top 25%.

The question I've been pondering, is if you were trying to lay out the carving pattern of those eyes which are larger on top, but then drop about 50% in size, how would you do that? The last one, Common Whitetail, probably shows the transition best. I just threw in a few others so you can have a little sample taste of Nature as I see it.

Tis the Dragon season. Ben, my assistant dropped in this morning. I've been gone for over a week, and as we were parting, out on the parking lot, the Whitetail flew up, and lit on my chest for a moment. We looked at one another, and I said I think I need to go get my camera, and see what she is offering.

Hope it's OK for me to show these here, and that you enjoy them half as much as I do taking them. K


http://www.flickr.com/photos/7391658@N03/sets/72157635110064297/

Re: Chewing-gum for the mind. *LINK*

#2

Re: Chewing-gum for the mind.

Merle

Keith, I don't really have any suggestions for you, but I can't imagine carving 30k facets by hand, if that is your intent. However, it might be the KILLER reason to buy the CNC router system of your dreams. :D

Re: Chewing-gum for the mind. *LINK*

#3

Re: Chewing-gum for the mind.

Keith Newton

Yea Merle, the CNC probably would be the way to go, if it can work from a photo, on the round. I'm pretty sure someone else would need to program that though. I have a friend who wants to buy one, and keep it in my shop, so maybe that may be possible someday.

But, I guess you know carvers don't count chisel strokes. We're not like normal folks. At least nobody has accused me of being normal lately. hehe.

Re: Chewing-gum for the mind. *LINK*

#4

Re: Chewing-gum for the mind.

Merle

I am not a hand tool guy but it isn't about counting chisel strokes IMO. It is about how long you plan to live and how many dragonfly eyes you think you might like to create. Whatever and however you decide to proceed, please keep us in the loop. lol

Re: Chewing-gum for the mind. *LINK*

#5

Re: Chewing-gum for the mind.

Robin Corell in Atascadero, CA

I'm not sure if you intend to carve in the round or just use the pattern of the eye facets to add a texture to a piece of furniture. Most of the carving I do is as texture or pattern so that is where my mind went.

Recently I've been playing around with some ideas that are more 2D then 3D. the idea originaly was sparked by an african sheild that has a carved design that is partially filled with plaster. I am part of a figure drawaing group that meets two evenings a month and my idea was to transfer some of my drawings to wood and carve the pencil lines and then fill them with plaster.

My first problem was how to transfer the drawings to wood. I have done the old stand by of using some sort of solvent to transfer a lazer printer image onto wood. this works but in my experiance it leaves a lot to be desired in the quality of the transfered image. I stumbled on the solution one day at school when I saw a sample that another instructor had done for his class. Its something that is coming to be known as a Purell transfer. An image is printed on Inkpress clear film #CF851120 (available from amazon). I am using a pencil drawing that I scan but a color photo will work too, just remember that your wood will be the white in the image. I then lay the clear film ink side to the wood and tape it across the top to create a hinge. I then flip it up and saturate the area where the image will be with Purell hand sanitizer (Purell brand has the highest alcohol content which is what makes this process work) you want the wood saturated but with no globs of Purell on the surface. quickly flip the plastic over and roll over the image with firmly but noit too hard with a rubber brayer, after about 20 seconds lift a corner of the film and peel it off. The ink will be transfered to the wood.

You can do a google search and find multiple sites where this process is done using photographs and transfering them to heavy archival paper such as Rives BFK, so far I have not seen anyone else using it on wood. It does transfer a slight amount of some type of coating from the plastic and my gut tells me it is some kind of shelac based mixture.

The attached picture is of one of my drawings transfered to a glued up alder panel and then coated with encaustic. Im lousy at photographing 2d work and the pic is with my phone but some of the bluryness is due to the softness that the encaustic adds.

Somewhere in this long winded reply I forgot to add that when I tried carving the pencil lines with a V tool the incised lines were too fine to hold the plaster the way I had hoped. I then tried filling them with some colored encaustic which worked but then I lost the carved effect as that just read as a graphic so I opted to just leave the transfered image as is and coat it with some encaustic which leaves me the option of doing some hand colored variations.

Just tossing the prosess out as a way to transfer a design onto wood for carving or to use as a way to print your photos onto wood.

[URL=http://s453.photobucket.com/user/rcorell/media/sculpture/landscapeasfigure2_zpsfcdd58ac.jpg.html][/URL]

Re: Chewing-gum for the mind. *LINK*

#6

Ellis Walentine

Whew! Awesome shots, Keith!

Ellis Walentine

Every time I try to photograph a bug, it flies away and maybe I get the tip of the tail as it exits the frame. Do you anesthetize these critters to get them to hold still, or what??

I met a fellow on a trail in the Canadian Rockies once, who was carrying a large butterfly net. I asked him what was with the net, and he told me he was an entomologist from Indiana or somewhere and his specialty was dragonflies and damselflies. He liked studying them because there are relatively few species in their genus, compared with other insects. He said the markings on the thorax and abdomen are the identifying features of the individual species. What fascinating creatures!

Regarding the carving layout question, you didn't mention what shape of object you want to decorate with the pattern, not that I have any idea how to lay out the pattern in any case. Are you thinking of carving a representation of an actual eye, or of decorating a flat or curved surface with the pattern? How would you integrate this into a project?

Great post. Thanks.

Ellis

Re: Chewing-gum for the mind. *LINK*

#7

Holy macro......

roger lance

world class photography and woodworking.....WOW.

Re: Chewing-gum for the mind. *LINK*

#8

Amazing shots, beautiful subjects!


Re: Chewing-gum for the mind. *LINK*

#9

Me too

Tony - Memphis

I kind of dig dragon flies. We have a lot of them in our yard. When I was building a small veneered table last year, I decided to attempt inlaying a dragon fly...worked out ok...


Re: Chewing-gum for the mind. *LINK*

#10

Thanks Robin Ellis Roger, Mark

Keith Newton

I'll try to respond to all at once. Robin, I like what you shared, it gives me some idea that I will try. Before, for a turning, I went to a fabric store, and bought some loose weave net, which I stretched over a turning blank, sprayed with black primer, for the facets. Unfortunately, it was a square pattern, which looked more like snake scales, then my sister gave me a hex weave mesh laundry bag, which would be great, but I haven't tried it yet. I'd like to try the print transfer that you mentioned.

Ellis, funny that you mentioned your challenge, and the entomologist. Just this week, I posted an observation on the Audubon List-serve form my state, and casually mentioned an observation of lots of Lubber grasshoppers. Later, I got an email from a Phd. entomology prof, wanting to come down so I can take him grasshopper wrangling, to gather them for his next class. ha. After getting his attention, I sent him a couple of episodes of my "Field-notes from Frogwarts", after which he got signed up for my mailing list, which I hope will one day become a book.

Funny, it doesn't seem like too long ago, that I, like you mentioned, had a hard time getting close enough to capture anything worth keeping, but somehow I seemed to have developed a skill,,,,,, or maybe I'm just lucky, that the things I want to shoot, seem to be under my spell, and allow me to get close. If I'm lucky, they are in nice settings, while they are doing their bug thing, rather than capturing them with a net. I'm not out to get pics for ID purposes, but rather for my own pleasure. When I take a good shot, others get to enjoy the beauty of Nature as I see it. Most people, even if they were standing right there with me, simply would not see the things I have trained myself to see and capture.

I have been thinking of doing a series of turnings, which I would use some of the details on, but I can't seem to find much time for that lately.