Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

band saw ?

Posts

band saw ?

#1

band saw ?

Darrin Hill

ok.. so are the bearings the only thing that keeps a blade cutting straight or am i missing something?

my 12" craftsmen cuts about 10-15 degrees off.. i've changed bearings 3-4 times this year, and right now they're fine but cutting off several degrees...

if i get the bearing to just within a dollar bill thickness and move the opposite one to the same, i can watch one bearing do nothing but spin and the other sits there...

and without taking a micrometer and a microscope i cannot see how the bearings are not the same distance from the blade.

big issue i have is that craftsmen brand is basically evil... i dont have a manual other than the internet, and i have to pretty much guess at fixing the guides... and the one on the internet is so badly reproduced that i cant read it... and calling craftsmen to ask for help.... it would be easier to talk to a rock... that is on the dark side of the moon... during an eclipse... at the summer solstice....

i called them once to ask them a quesiton bout a miter gauge...

a. they had no idea what one was...

b. it took an hour of being passed to many different departments before i hung up in frustration..

Re: band saw ?

#2

Re: band saw ?

Larry in nw ohio

Darin I have had a Craftsman 12" band saw for over 30-35 years and it`ll still get 1/8"X5" oak out of it. I have had trouble for a while, until I learned how to get it set up, it is a little touchy. I don`t suppose you live anywhere close to NW Ohio. If you did you sure would be more that welcome to look at mine and I be more than happy to help, if I can. What model is yours. Mine is a 113.243300 or a 3310. If you want to, you can email me any time.Larry

Re: band saw ?

#3

Ellis Walentine

That's a lot of drift

Ellis Walentine

If your guide bearings (both top and bottom) are within a few thousandths of the blade and you're still getting this kind of drift -- with any bandsaw -- I'd change to a sharper or better quality blade. Not too many variables at work here, and the blade is the usual suspect, as it can wander if the set of the teeth is slightly off, side to side, which it usually is because of the way they make typical blades. Or, if you hit something hard on one side of the cut, it could dull or dub the teeth on that side, leading to drift.

Change blades and report back.

Ellis

Re: band saw ?

#4

Re: band saw ?

paul in AZ

Agree with Ellis on the blade. Thats an insane amount of drift. The teeth can get a set to one side or the other from cutting arcs in hard wood. If so the blade will want to pull in that direction.

You might find that a new blade and perhaps some more tension would help this.

Re: band saw ?

#5

Bob

band saw solutions  *LINK*

Bob

Thought I would chime in here as I have worked on a lot of saws with the same problem. Not all the fixes were the same so I will just list the ones I found and what I used to fix them.

#1. Drift to the left or right: Blade tracks off to the back of the top pulley crown and opposite on the bottom pulley. This is reversed for the drift in the opposite direction.

#2. If the blade is tracking in the same place on both pulleys then run the teeth at the top of the crown, some people say it will damage the rubber tire but I have not found this to be so.

#3. Crown it worn un-even on the tires. Its best to use spray adhesive in a long stick and put son sand paper on it and use it to clean the tire, it shows that its clean in some places and not others change the tires (only change in pairs).

#4. Incorrect tension! (this is a big one) with the guard bar all the way up press side ways on the blade until you see red under your finger nail, at this moment the blade should not move more then 1/8". I found this to work on saws from 12" to 20".

#5 Round the back of new blades using the sand paper on a long stick trick. DO NOT HOLD IT IN YOUR HAND! (If you cut your finger off don't blame me).

These 5 tips are the ones people miss most. Its easy to find things like bad bearings and wheel misalignment so if the problem is not bearings or alignment give it a shot.


Band Saw Maintenance

Re: band saw ?

#6

You should be able to run straight cuts...

Dick Coers

without any guides what so ever. I once took off my top guides to resaw oversize stock on my Minimax. Worked great. Woodmizer also doesn't have any side guides on their sawmills. Feed speeds are also very critical. Feed too fast with lots of teeth, and the gullets fill with sawdust and can't cut well. If you see sawdust in your kerf, slow down till it's clean.

Re: band saw ?

#7

Re: band saw ?

Larry in nw ohio

Darrin I sorry I didn`t say anything about the blade. You should get a good blade, don`t get them from sears. You can get better blades from Highland, or I get mine from Supercut bandsaw. I think they are a much better blade. You can get carbide coated teeth for about the same price, as noncoated elsewhere. Good Luck. Larry

Re: band saw ?

#8

Re: You should be able to run straight cuts...

del schisler

go here and watch this video with alex on band saw set up the best

http://www.youtube.com/watch?v=wGbZqWac0jU&list=FLYDEiGLzvqQNIl-nqvD2OOQ&feature=mh_lolz

Re: band saw ?

#9

Re: band saw ?

Darrin Hill

im thinking my tension isnt right.. there is a gage on the side that says where it should be, but i cant turn the wheel that tightens it as tight as it says it should be.. wheel wont turn as much as it should...

im checking on making a bigger wheel that would be easier to turn..

d

Re: band saw ?

#10

Re: band saw ?

Larry in nw ohio

Darrin I wouldn`t make a wheel, I made a crank. Took a 3/4"Xabout10" and drilled a hole for the threads in the bottom, then made an angle about 6" X5" and welded that on top of the threaded piece. Also I think I saw something like that in some catalog. I`ll tell you that crank is so much better than a wheel. Larry

Re: band saw ?

#11

Re: band saw ?

William Duffield

Bandsaw tension indicators are notoriously inaccurate. Use the blade deflection method, or for Timberwolf low tension blades, the blade flutter mechanism, instead

There's no way you should not be able to completely compress the spring on a 10" bandsaw with the knob on top. Your spring may be worn out, from being compressed beyond its elastic limit too many times, and from being left tightened instead of loosening it when you are done using it. If you continue to try to tighten it you risk bending the frame and putting additional wear on the bearings. That's why Carter sells aftermarket, stronger springs and blade quick release mechanisms for larger bandsaws.

When you align the blade with the upper wheel, center the blade on the tire, instead of aligning the teeth with the center of the tire. And do the alignment with the guides not engaging the blade. Once the blade is aligned with the upper wheel, it should also align itself with the lower wheel. The wheels should be coplanar. You can check this with a straightedge, but may need to remove the table to do so. Lay the straightedge across the front faces of both wheels. It should touch in four places, whether you are checking at the middle or to either side of the middle. The blade tracking mechanism affects this since it tilts the top wheel. If the wheels are not coplanar, then you will need to shim the lower wheel to bring them into alignment. Larger, fancier bandsaws have adjustments on the bearing housings to accomplish this, but your Crapsman probably doesn't. Wheels usually get out of alignment as a result of the frame being bent, but there can be other reasons as well..

Re: band saw ?

#12

Re: band saw ?

Kurt

I would sure start with a blade not from a big box, house brand Grizzly, Harbor Freight etc. Any 'real' bandsaw blade vendor can make any length you want. Woodcraftbands.com gets pretty good reviews, Highland Woodworking, Iturra, there are a bunch of good bandsaw vendors. You could also check local shops. They buy rolls 100'+ long or so and cut off & weld what you need. I've been pretty happy with Lenox flexback myself.