Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Clamping a bent lamination question

Posts

Re: Clamping a bent lamination question

#26

Ellis Walentine

Thanks, Don

Ellis Walentine

The main laminating form for the chairs took me over 100 hours to construct, as the angles at each point of the curve needed to be matched with the twist that those laminates would/could take. Once the form was carved and constructed, I needed to arrange angled blocks for the clamp heads, and in several cases holes through the deck of the jig to clamp to. The glue-up of the main lamination alone took 52 clamps and about 45 minutes, using plastic resin glue. There were three other laminations involved in each chair: the two sides and the bottom of the frame where the rosewood panel is suspended. The bottom one was so tight that I needed to hot-pipe bend the laminates in advance. Talk about labor-intensive. When I think about how little I made per hour on those chairs, it kills me.

This, of course, begs another discussion about overreaching with your designs, especially if you're trying to make a living at it. Still, these things are so solid they'll be around for another thousand years, so there's probably some legacy value to them. That begs another discussion......

Ellis

Re: Clamping a bent lamination question

#27

Re: Thanks, Don

Don in Central Illinois

Don't believe I have the patience, nor the ability, to do that. However,I am thankful that others have the patience and ability so I can enjoy looking and admiring the final product? Or in this case, the art.

Re: Clamping a bent lamination question

#28

Re: Clamping a bent lamination question

Derek Arita

John, I'm very interested in this form technique. Can you explain more or maybe show pics?

Re: Clamping a bent lamination question

#29

Re: Good guess, Keith

Mike Rubes, Cary, NC

Hi Ellis,

I am just seeing this pic. Those chairs are fantastic. That's an incredible realization of a truly inspired design. I hope that whoever has the chairs now and in the years to come appreciates them.

Thanks for the pic, that really is great stuff.

Mike

"Woodworking" today in putting my son's second hand desk together in Cary, NC....