Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Marking my tools questions (anti theft/recovery?)

Posts

Marking my tools questions (anti theft/recovery?)

#1

Marking my tools questions (anti theft/recovery?)

Barry Irby

I mentioned in a previous post that the house we were working on was broken into and they got almost every tool that had a battery or cord. About $4K worth of stuff. I am replacing them. Ordered the little six gallon Porter Cable Air compressor Reconditioned off Amazon. Came with the same three nail guns. They appear to be new. If they had any use, I can't tell. Looks like I saved a few bucks and got a good deal. Also ordered the Bosch Impact driver and Drill. Had a number of batteries they missed.

I will take photos of them and record the serial numbers, but my question is how to mark them for additional protection. I hate the idea of painting them pink or something but it might deter theft. I think I will get a vibro- writer and engrave my name in them. Any Ideas?

Re: Marking my tools questions (anti theft/recovery?)

#2

It worked for me on the farm

Bill Tindall, E.Tn.

" I hate the idea of painting them pink"

I had a problem with theft of a gate located adjacent to the road. I got the paint store to mix a most feminine bright pink paint and painted the gate. It has never been molested. However, I can see the downside of moving your bright pink air compressor to the job site.

Re: Marking my tools questions (anti theft/recovery?)

#3

Re: Marking my tools questions (anti theft/recover

Tom Dunlap

A buddy gave me an electro engraver. Kind of like a real low power arc welder. alligator clips go to a 12v battery or battery charger. It's much easier to electro engrave than vibro engrave. I understand that the electro changes the metallurgy deeper than vibro. Even if the markings are ground off the electro can be detected somehow. The article I read was about tracking stolen firearms. Thieves thought that they could grind off the serial numbers but the CSI team, the real ones, not TV, did some 'magic' and the factory electro numbers show up.

Pink...of course...it's a manly color! I paint almost all of my tree climbing hardware pink. Its much easier to sort gear at the end of the day when I climb with friends. It's amazing how the paint lasts for many years. Lots of little nooks and crannies to store pink.

Re: Marking my tools questions (anti theft/recovery?)

#4

Re: Marking my tools questions (anti theft/recover

Larry in nw ohio

Barry I think I would paint them a fluorescent pink as bright as you can get it. That way they can see the tools in the dark, and you would be able to see your tools a mile away and as you walk past construction sites. Good Luck Larry

Re: Marking my tools questions (anti theft/recovery?)

#5

Jason Roehl in Lafayette, IN

Engraving/marking...

Jason Roehl in Lafayette, IN

Engraving on the outside would make it easier to spot, but I would also open the tool up somehow and make an engraving somewhere inconspicuous. That way, the thief will likely miss it if they try to grind it off, and if you had to "prove" that it was yours to someone, you could tell them how to open it and find the markings that you made.

I had a bunch of tools stolen out of my garage 9 years ago. Thankfully, I still had receipts--some of those as old as 10 years. They also helped me realize what had been stolen, as I went through the tool receipts, I could check whether that tool was still in my possession. The only downside to the process was the adjuster I dealt with on the phone had a very severe speech impediment and was difficult to understand (I wonder now if the insurance company did that on purpose...grrrr).

Jason

Re: Marking my tools questions (anti theft/recovery?)

#6

What happens if you mark them?

Gary Smyth

Around here flea markets, auctions, and house sales are common. I regularly see tools with markings on them - paint, initials, engraving, add ons of all types. No one seems to pay attention. Several years ago I bought a metal workers machinist tool box complete. Each tool has a name or initials on it – some not his. I believe I got mine legit, but I do not pay attention to the markings. Do you think that I asked if he owned the tools he was selling me? At the point of the sale I care only that it does the job. Like many, I favor old tools. If it’s good and in my price range, I purchase, and I’d venture to say that most of them are marked, I expect them to be marked, and I don’t care. I work out of my own area, I don’t loan tools, tools travel with me if I work away. I’m not leaving tools on site. I have no need to do that. But anyone who would ever accuse me of stealing someone else’s property would be asked to leave and not ever come back. You absolutely need to record the information and purchase date for the insurance company, but don’t ever expect (accept by luck) that you will recover the old (or new) tools or even notice them in the possession of someone else. If you should find one that is or looks like your tool, do you think the person will say he stole it or knew it was "hot"? Chances are he or she will say they bought it from "some guy" at some public event. You gonna challenge that? As to pawn shops or Craig’s list, the seller is not going to help you as they don’t want to take the loss. I’m truly sympathetic to your loss but photos and paperwork will be the only defense you have to protection -- and then only after the fact.

Re: Marking my tools questions (anti theft/recovery?)

#7

Re: What happens if you mark them?

Bill Howatt

I agree with your assessment of how useful the labeling would be as far as recovery goes or people being suspicious of them at a sale.

Larger tools with serial numbers can be shown to belong to you if you have a record of the purchase and serial numbers. Engraving tools without serial numbers like wrenches could be useful if the tools are recovered in order to demonstrate they are yours and not somebody else's.

Bill

Re: Marking my tools questions (anti theft/recovery?)

#8

JL

Inventory tags

JL

One place where I used to work had metal inventory tags and a spreadsheet.

They affixed small metal tags with an inventory number to all equipment and tools as the equipment and tools came in. They had a spreadsheet that listed the tool (or piece of equipment), a description of the tool, serial number, the area or room where it could be found, etc.

I made a similar spreadsheet for my tools for insurance purposes. You could probably find the adhesive backed inventory tag online - with or without bar codes.

Re: Marking my tools questions (anti theft/recovery?)

#9

That's the thing, isn't it?

John in NM

I've only found marking tools to be handy around a large job site. If someone borrowed your screw gun you could see it across the room if it were painted bug guts green :D Still wouldn't work with a determined thief though, they don't care what color it is if they're going to sell it for $20 at the pawn shop.

If there were a fool proof method to prevent thievery, I think we'd all be doing it already - I would call theft the oldest profession, rather than that other one :D

Re: Marking my tools questions (anti theft/recovery?)

#10

Re: Marking my tools questions (anti theft/recover

Merle

I got household inventory software for my phone. I take a pic, enter all the available info, including model, serial number, purchase location, price, date, barcode, etc. Then my phone backs itself up daily to the cloud and I am happy. The killer was getting the initial info in the phone, but now it is a non-event and LOML will have a clue when she needs to clean out the shop in 20 years or so. :D

Re: Marking my tools questions (anti theft/recovery?)

#11

Re: Marking my tools questions (anti theft/recover

Howard Norman

Merle, that is a great idea. What is the software that you are using?

Howard

Re: Marking my tools questions (anti theft/recovery?)

#12

Re: Marking my tools questions (anti theft/recover

Merle

Howard, I have an Android phone so the software may or may not be available depending on your OS. The home inventory software is MyHome Pro (I think this cost $3-5) and the backup software is G Cloud ( I think this was free). If you have a shop full of tools, and who doesn't, it is really tedious entering all the data, trying to find receipts, looking for your tools or comparable ones to get price info, etc. However, several days later and about half done (the big stuff is completely done), I am satisfied that I have captured 75-80% of the dollars.

Re: Marking my tools questions (anti theft/recovery?)

#13

Re: Marking my tools questions (anti theft/recover

Merle

P.S. I only used it for the shop and haven't even thought about doing this for the rest of the house. LOML says she is in charge of that. :)

Re: Marking my tools questions (anti theft/recovery?)

#14

At a minimum...

Tom Dunlap

...spend a little time with a phone video or video on a still cam. Open drawers...rifle through them, churn up the stuff at the bottom. Save the vids to the cloud, external HD, flash drive...whatever.

As time and ambition coincide do the full-on spread sheet/receipt capture route.

Tom

Re: Marking my tools questions (anti theft/recovery?)

#15

Re: Marking my tools questions (anti theft/recover

Howard Norman

Thanks Merle. I have an Android phone(Droid X) also. I will look into the software.

Howard

Re: Marking my tools questions (anti theft/recovery?)

#16

Mac inventory *LINK*

Tom Dunlap

My house is under Mac's umbrella...which isn't secure from ne'r do wells!

I found this for Mac:

I have no clue how good, or easy to use, it is though.


Mac inventory

Re: Marking my tools questions (anti theft/recovery?)

#17

Re: Marking my tools questions (anti theft/recover *LINK*

John McGaw

How far to go? If a person was OCD something like RFID tags glued inside each tool in a relatively 'plasticy' location (hand grip or whatever) and the ID code recorded along with the item's SN and purchase information in a safe location. The mere presence of the tag hidden inside and knowledge of the tag's ID code should be enough to convince the police of the provenance of the item. Tags are cheap and readers, if one should actually need one, aren't ridiculously expensive. An electronic hobbyist could rig one from easily-available parts in short order.


https://www.sparkfun.com/products/9417

Re: Marking my tools questions (anti theft/recovery?)

#18

Re: At a minimum...

Jerry Roberts

A close relative of mine works for an insurance company. He knows just abt what tools I have and he said if they are ever stolden or fire its up to me to prove to the insurance co what tools I have, or had. He suggested taking a pic of each and everything I would want to replace with the serial no. So far I haven't done it because of my laziness. But I plan to.

Re: Marking my tools questions (anti theft/recovery?)

#19

Thanks for all the thoughts.....

Barry Irby

I have to admit that I scoff at the idea of storing the information "in the cloud". Some of these tools were forty years old but essentially "as good as new" or perhaps better. Computers, digital cameras, cell phones, and the Cloud did not exist as we know them when many of these tools were bought. I have a hard enough time keeping my computer backed up let alone knowing how to access the remnants of any program I might install today to track my inventory of tools.

Probably a good idea, but I'm dangerously close to geiserdom and it's no time for this old dog to start learning new tricks. With my luck the next thing they will steal will be my computer.