progress report on desk
Bill Tindall, E.Tn.
Daughter moving, granddaughter visiting, torrents of rain and resultant growth, etc have delayed work but I am back at it at last.... tediously.
PIC1 
Picture 1 shows 20 of the 36 parts to be made, not including drawers which will add an additional 15 parts. I am thankful for machines to do the grunt work of sizing components, but the joinery has by necessity been all by hand. Four remaining parts are the stretchers with not trivial M&T joinery, and one stretcher will be a bent lamination. The other parts are simple drawer runners and kickers. I haven't counted all the joints in this thing but it must be a lot. Each back leg has 7 joints each. Thanks again to all that helped on the leg design. Daughter, the artist, approved of the result.
Pic 2 
It has come along to where I can do a dry fit to get the stretcher dimensions and angles for the tenon shoulders, at last! A test stretcher is clamped to the legs. It looks too tall so I will shave a bit off.



