Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Sculpture stand design

Posts

Sculpture stand design

#1

Sculpture stand design

Ray - Middletown, IN

Getting ready to build a room addition for a client and at the end of the presentation she says "I already bought a sculpture for the corner and you are to build the stand for it." Thought I would get the collective wisdom for this unusual piece of um, er, art?. Here is the room it is going in.

and here is the art?work. It is 51" tall.



Her husband had a few suggestions,,,, not sure if he is allowed back in the house yet.

They have young grandkids so I think it will have to be attached to the stand and the stand to the floor or wall to prevent someone wearing it.

Ray

Re: Sculpture stand design

#2

easy....

Bill Tindall, E.Tn.

It needs to be a lily pad shape. A green copper lily pad would be grand.

Re: Sculpture stand design

#3

Re: easy....

Larry in nw ohio

I would suggest also along with yours, is if that "art piece" has any weight to it at all, I would also attach to the wall behind it somehow and in two places. Good Luck Larry

Re: Sculpture stand design

#4

Even Easier

Mark Mandell - Gone Round In New Jersey

Just drop it in the pool . . .

Re: Sculpture stand design

#5

Alternative

Mark Mandell - Gone Round In New Jersey

Center it on the beam above the water. Everyone can see it, she won't have to dust it, and it will be (oddly) appropriate.

:D :D

Re: Sculpture stand design

#7

Re: Even Easier

Ray - Middletown, IN

Husband wanted it hung from the truss, between the ceiling and roof. She didn't laugh...

Ray

Re: Sculpture stand design

#8

Well, no

Bill Houghton, Sebastopol, CA

Trusses aren't designed to carry that sort of weight on the bottom chord. Obviously, she has better engineering sense than her husband.

Re: Sculpture stand design

#9

Here's the design

Ray - Middletown, IN

I really liked the lily pad idea, so here is a sketch of my first thought. Gotta get the room started then I can start on the stand. Thanks to Bill for the idea.

Ray