Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Three wheel band saw blades.

Posts

Three wheel band saw blades.

#1

Three wheel band saw blades.

Randy Johnson

I've been gone a while. I started shooting muzzleloaders again in the last year and it kinda took over.

My mother's minister was given a selection of woodworking tools. Some of it, like the Jet lathe, is pretty nice. He also bought a generic three wheel 10 inch bandsaw sans blade for thirty bucks at a garage sale. From what I have found out so far, he probably paid too much.

After a lot of looking, the only ten inch band saws I can find are two wheel. What I need to know is how long the blades for a ten inch three wheel bandsaw should be. Even if the consenus among the majority is that the saws are junk, there are still a ton of them out there, and I can't believe they quit making blades for 'em just because they quit making the saws.

Re: Three wheel band saw blades.

#2

where to buy blades

Bill Tindall, E.Tn.

About everywhere will have a shop that welds up band saw blades from coil stock for professional shops. The price will be about half what woodworking store blades cost. To find such as shop find a professional woodworking place and ask where they get blades. Of you can have them mailed from Misenheimer in Morristown TN,

Re: Three wheel band saw blades.

#3

Re: Three wheel band saw blades. *LINK*

Mark Mandell - Gone Round In New Jersey

Contact Suffolk Mech. at the link. Give them the make and model of your saw and they will recommend the best blades and make them for you at no extra charge. I've been using Timber Wolf blades for 20 years.


Timber Wolf

Re: Three wheel band saw blades.

#4

Re: Three wheel band saw blades.

John in NM

The blade length is often listed somewhere on the saw. Blades for 3 wheel saws are no different than blades for 2 wheel saws, it's just a matter of length and thickness. Blades for those small saws are often thinner though.

Re: Three wheel band saw blades.

#5

Re: Three wheel band saw blades.

John Veerkamp

I tried several band saw blades including one from Sulfolk. They all broke too soon. The smaller wheels cause more flexing fatigue. I found blades that last very well for my three wheel saw at Supercut.out of Idaho. I think their actual name is "Supercut Bandsaw Company". They do have a web site where you can see what they offer. I called their 800 number and found them to be very helpful and informed. The price wasn't bad and shipping was quick. The number is 800-356-9918.

Instead of the blade lasting a few hours of use, they Supercut has lasted over two years now and still cuts great. I have no release mechanism on this saw and there is also no hump developed from setting for long periods under tension.

No connection , just a satisfied customer.

Re: Three wheel band saw blades.

#6

They're a good company...

John in NM

One of the shops I used to work for used their blades, and they are what I would likely buy if I didn't make my own. About the best deal going in a ready made blade.

Re: Three wheel band saw blades.

#7

+1 on the "thinner," from what I have read

Bill Houghton, Sebastopol, CA

It makes sense that blades for a three-wheel saw would need to be thinner. The wheels are smaller, so the blades will have to flex around a smaller radius (turn a tighter corner).

Re: Three wheel band saw blades.

#8

Re: They're a good company...

Larry in nw ohio

Yes this company in my opinion is a good company and have really good blades. I`m not an expert in any way, but they do last and cut very well. I brought this company to this board over maybe a year ago, but I don`t think they took hold very well, I think only one or two people tried them, one was Del, and he really like them. They have a lot of carbide coated tooth blades and the price is good. All you need to do is try one. I have no connection, just a satisfied customer. Larry

Re: Three wheel band saw blades.

#9

Re: They're a good company...  Still use them