I am in the process of cleaning out my parents' home after my father's death. He was a carpenter and acquired a basement full of tools over many years: Sprunger table saw, planer, drill press, lathe, plus loads of small tools. These tools are probably 30 to 40 years old, if not older. My hope is to sell them to provide some money for with my mother's care, but am realistic that they probably won't bring a lot of money. Any advice?
Quality stationary power tools are in high demand. Start with a local woodworking club, then ads in regional papers and Craigs List. People will drive 100 miles to get a quality tool.
Jan, Bill is quite correct, many quality older tools will bring more money than new ones on the market. I purchased a couple of old Powermatic lathes from a school, I reworked one for my use and sold the other to a man that drove about 800 mi round trip to pick it up. He was thrilled to get it. If your father had a few woodworking friends, you might contact at least a couple of them and ask them to help, (Most woodworker are honest but one may give you a low ball price to buy it himself so get at least two). Also you may look on the internet to see if similar tools are selling and the price asked.
If you have a local woodworking club - that would also be a good place to contact. Older hand tools may also command a very good price if they are of good quality and in good shape. You may be pleasantly surprised to see how much the tools (and supplies) bring if you do your homework.
In the Internet world, there's always somewhere with people interested in anything. For old stationary woodworking machines, that's the link below. Look on the want/sale board, "BOYD," for price possibilities. Once you register, you can post ads there.
One note specific to that forum: do NOT ask on the discussion boards what your machines might be worth, as that's prohibited.
One note true of almost all online sales: good pictures (several, from different angles, and without extraneous stuff on/around the machine) and thorough description makes a world of difference in generating interest.
Re: brand and model # are important pieces of info
Henry (Raleigh, NC)
Here's a pet peeve of mine. All too often I see local Craigslist ads that says something like "My fathers old table saw for sale - $price"
My thought process:
"If seller can't be bothered to tell me anything more than generically what it is, the seller likely doesn't know anything else about it. Calling and asking will be fruitless" and so I won't bother and I move on.
My point is - at least provide as much brand and model information as is available. If you can't determine this info - state that because potential buyers will ask you.
there are some rules - axioms, really - about sellers of old machinery. OWWM Rule No. 1 reads: "The seller, standing in front of the machine with access to all sides and in full daylight, will not/cannot describe the machine correctly." This will not be true for Jan Wittig, who clearly knows enough about these machines to develop accurate descriptions; but it's sure true for a lot of people selling machinery.
About the small tools: if by this you mean small electrical tools, it's unlikely that most of them are worth much. There are a few exceptions; there are some Porter-Cable sanders (503 and 504, for the age range you believe these tools to be) that will bring $200 on eBay.
As to small, non-powered hand tools - planes and the like - these vary all over the place. Age often matters. Stanley's planes up to World War II are considered good tools, and a basic smoothing plane (No. 4), cleaned up, can bring $40 on eBay. After the war, quality declined, becoming pretty awful by the 70s, and planes of this age usually won't bring much.
A few, collectible hand tools can bring far more money; but unless your dad was into buying stuff to have it, as opposed to use it, there may not be much collectible stuff in the shop.
In your place, I'd probably sort through the tools and use your judgment about which ones might be worth something; then cruise completed auctions on eBay to see if you're right. Do NOT waste your time with active auctions; people will assign values apparently plucked from space.
All this can get pretty time-consuming. If you're also having to spend time caring for your mom...well, I don't envy you the workload.
For the small tools, if you have a digital camera, let me encourage you to post shots of tools you think might have some value and ask (more about that in a minute). If they're powered tools, post them here; if hand, over on the Hand Tools board. Understand that the replies will be speculative, with no guarantees.
The efficient way to post pictures is to set up a profile - the link below will give you instructions on how (note that you have to clear cookies related to Wood Central to set up a profile; if you don't, the software gets confused). Once you have a profile, you can upload pictures of 100kb or less directly from your computer.
Many of us here have taken care of our parents as they got to that stage. Those who haven't yet will probably be doing so at some point. It's hard work, but it gives you opportunities to honor your parents unlike anything else.
Old Delta has a following and there are collectors. But Sprunger were always a little lighter duty and will not bring the dollar that Delta would. But now that Delta is so horrible in the parts department, even the collector market for them may diminish.
Bill, Thanks so much for your advice regarding selling my father's older power tools; I clearly have more homework to do to try to find information on manufacturer, date, model number, etc. I have done some preliminary checking, but need to keep looking since that information is not obvious. The tools are well-used and fairly dirty. I appreciate your very thoughtful comments and suggestions.
Pictures will tell a lot. In Western PA tools are relatively inexpensive mostly because they sat. I hate to think how many decent tools I've seen that were left in barns and damp basements to the point that they are way beyond surface rust. Most kids today don't have the space, or the inclination to take care of, or want to learn to use old tools so if they were in good shape to begin with - and many aren't, the value drops quickly with rust, paint, chips, pitting, incompleteness, frayed cords, and caked on grunge. Good tools are good for several lifetimes but one can get discouraged trying to rescue a old tool that has problems. Not that the tool doesn't have working value, but because there are similar or identical tools out there that are in good shape at relatively the same price. Other advice here is on the money, especially model numbers, if it is working and complete is identified. If you aren't sure, and can't find a identical item online, get a second and third trustworthy opinion. It's a PIA but do what you can to clean up tools you think, or someone tells you might be worth something. Around here power tools generally go for 1/3 to 1/4 original cost (of course, there are exceptions). Of hand tools, cared for wood chisels, blacksmith, some planes, machinist/engineering tools, complete sets of anything, brand name lathe tools, big old vices, true antiques (late 19th and early 20 century) generally hold value. Hand saws, claw hammers, used pipe, "C", cheap clamps, cold chisels, plumbing tools, screwdrivers, pliers, braces and drills, levels, unsorted hardware, often go out the door, bulk, in buckets and baskets for $10 or less. Around here the Amish are particularly good at judging tools. They take the time and put better tools to use. They have the cash too. Good luck.