I need to buy a vac. veneering bag
Bill Tindall, E.TN.
Will someone that does vacuum veneering with some frequency please recommend a bag and source.
Knowledge You Can Build On — Est. 1998
I need to buy a vac. veneering bag
Bill Tindall, E.TN.
Will someone that does vacuum veneering with some frequency please recommend a bag and source.
Re: I need to buy a vac. veneering bag
Thomas S Stockton
Hi Bill
My current bag is from www.veneersupplies.com I got his thickest polyurethane bag and am really happy with it and they are a lot less expensive than other places. The connection to the pump hose is a little different than the ones I had been using but it was easy to make it work.
Tom
Re: I need to buy a vac. veneering bag
Jesse Cloud
+1 on veneersupplies.com, but start one page back on joewoodworker.com for a full range of info and a link to his veneer supplies page.
I've been using one of his bags for about 10 years now, with no problems.
He also offers a 'build-your-own' kit.
By the way, if money isn't tight, get a bag larger than you think you need, you can always roll up the extra length before pumping.
thanks much...ordered it
Re: Pump?
Hal
What do you use for a pump? I have no experience, but understand they can be expensive. TIA, Hal
Re: Pump?
Thomas S Stockton
Hal
new pumps and high cfm pumps can be expensive. Veneer suplies sells a pump that will work for about $100 and used pumps can be bargains.
Check his other site www.joewoodworker.com lots of good info and different ways to do things depending on budget
Tom
Re: Pump?
Jesse Cloud
Watch for a used pump on craigslist. Sadly, lots of cabinet shops are barely hanging on and are selling non-essential tools. Also, lots of hobbyists do a veneering project or two and then have a pump setting around for years.
Jim Shaver vac bag how-to article *LINK*
Jesse Cloud
can be found
here
Re: Thanks Tom