Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

This is quite clever

Posts

Re: This is quite clever

#2

Re: This is quite clever

mark valsi

Very clever !! amazing !

Re: This is quite clever

#3

Re: This is quite clever

John McGaw

I cannot imagine how long that video must have taken to produce!

Re: This is quite clever

#4

I wondered too --

Gary Smyth

If this was shot at 24 frames per second and a 8 minute and one second run time there were a minimum of 11544 set ups used in the finished product. If I use a conservative two minutes per set up to adjust lighting, exposure, camera, motion, etc. and a typical shooting ratio of 4:1 (shot to used frame) then there are 25.65 hours involved just in the shooting. More time than that was involved obviously as the materials and script, studio, and personnel assembly all have to be added to the project. Time or the bowl are not the key elements. The tale is the completed visual piece. In my view this is a contender in any "short" competition it cares to enter.

Re: This is quite clever

#5

Re: I wondered too --

John McGaw

Well, it clearly wasn't shot at 24fps, given the somewhat jerky movements in places. It probably was shot with variable timing and then processed to even out variations. But no matter how it was done the shooting and assembly process was insanely time-consuming. Far beyond me. I've done as much as 5 seconds of simple animation using tiny easily-manipulated toy cars at an NAB booth using primitive video-to-drive equipment and that took long enough that the booth owners finally gave me the bum's rush.

Re: This is quite clever

#6

Re: This is quite clever BUT THE MUSIC IS HORRIBLE

del schisler

i would pick some different music , just not for me i quit looking 15 sec. enough for me,

thanks for posting

Re: This is quite clever

#7

Bob

Re: This is quite clever

Bob

Very cool this is what my son in law does for a living its neet to watch him work in flame.

Re: This is quite clever

#8

Bob

Re: This is quite clever BUT THE MUSIC IS HORRIBLE

Bob

You missed the best part. You dont need sound turn it off and watch.

Re: This is quite clever

#9

Re: This is quite clever

Joanne in Point Pleasant, PA

Thanks, Mike. This is awesome! I love the whole thing, particularly the movements of the clamps, and the glue going on. And the pieces marching into rings for final glue-up! As amazing as the work that went into filming this, is the work that goes into such an intricate glue-up for such a bowl. I have new admiration for folks who make these things. I have enough trouble just doing the 'flatwork'. I can't imagine if I had a lathe in my shop.

Re: This is quite clever

#10

Re: This is quite clever

art demers

AmaZing even the cello was very good IMHO