Last year I was walking past some Irises on my property and thought they would work well for marquetry/inlay so I took a bunch of pictures of them for future reference.
This is the result, the cabinet is claro walnut with ebony and mother of pearl and abalone details. to make the inlay in the corners i start by doodling out designs I think would look good and then when I find one I like I refine the drawing and then cut the materials.
The marquetry/inlay is done in two steps, the leafs are koa and done with the double bevel technique once these are cut and pressed onto the door the flowers are made and inlayed.
That is one sweet-looking cabinet, Thomas. I'm reminded of all kinds of things, like Ruhlmann, Krenov, Craig Stevens, and ... You! Your work has always been exemplary, and this piece is no exception. I like it that you're venturing more into the figurative stuff.
I have a foot fetish and those feet are delightful. Will you offer more detail as to the transition between feet/skirt and body. It looks like some sort of cock bead?
The iris is one of my favorite flowers. I love how the doors are not bookmatched, but 'a garden scene' when viewed together. The walnut almost looks like mahogany in this picture. The overall effect is very serene to me.
Yes the beading is ebony, the cabinet is a little darker than the picture. I shot the photos the night before going on vacation and just uploaded a random one from my camera.
Next step is to look at all the pictures and pick the best.
Wow thanks for the kind words. The veneer is 1/16", I aim for 3/32nd and after running it through a sander to even everything out thats what I end up with.
Calling it a cockbead is a good description. I make the beading and it is set into a rabbet and glued in place. The thickness is 1/16" thinner than I usually do but I think a big improvement visually.
Thanks for the nice words, when I do spec pieces these days I need to do designs that keep me interested and are challenging. The cabinet sat completely finished except for the doors for a couple of months until I figured out what I wanted to do with the inlay and did paying work. The interesting thing is that the design I decided on was not much different than I originally envisioned. Sometimes it is important to explore a bunch of design options before deciding what to do, I also find that I come up with new ideas for other pieces this way.
Did you run into any very fine fractures caused by bending the veneer while it was being sheared? Usually they appear after it is glued on. I worked on 1/8" cherry, the only solution was sanding sealer and lacquer.
It wasn't good enough for oil varnish since the fructures were appearing as micro-fuzz, enough to be felt no matter how much/fine I sanded. I tried to wet, then sand as well, no workie... but lacquer fixed it.
Then again, that happens less likely in open pore woods like walnut, mahogany and oak. I guess the open pores absorb some of the applied forces by the veneer shearing blade. Thick maple and cherry veneers are very prone to this.
Sorry I took so long to answer but my browser tends to bury older questions. I ran into a similar problem on a walnut desk I did but it was a couple of cracks that I got some glue into and burnished them down with a hot iron, the inside of the curve totally blew apart when I test pressed it so I went with commercial veneer. I never use anything as thick as 1/8" except for laminating curves. Usually when I'm doing a really tight curve I plan on using commercial veneer since it is so thin.