Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Router Table top Recommendations

Posts

Router Table top Recommendations

#1

Bart Goldberg

Router Table top Recommendations

Bart Goldberg

I am looking to replace the NYW designed and shop made router table and fence I made several years ago. I plan to keep the cabinet of course, but want a better table and fence system. I have been looking at a few:

1) Sommerfeld's aluminum table top that would be paired with their Fence and a Triton Router

2) A Woodpecker's "sandwich" top made of MDF and Phenolic, but not sure what fence I would pair it with.

Any feedback on these and potentially any other I should consider.

One issue I have is ensuring I can attach a new top to my existing cabinet - that is an issue with all of the pre-made tops I've seen so far.

Any suggestions are welcome

Regards

Bart

P.S. remove the "1" from my email address if you try to contact me directly.

Re: Router Table top Recommendations

#2

Re: Router Table top Recommendations

roger lance

Bart....did you make the first version of the NYW router table or the second version which had an improved fence and top??

Re: Router Table top Recommendations

#3

Bart Goldberg

Re: Router Table top Recommendations

Bart Goldberg

Not sure which version. I built mine about 14 years ago I think.

Re: Router Table top Recommendations

#4

Re: Router Table top Recommendations

Brian in SLO

I can't say much for a table top itself as I use a Bench Dog cast iron extension off the end of my table saw.

However, for the fence I use an Incra LS positioner and have had nothing but a positive experience from it. I have it mounted on a 3/4" base with friction locks that fit into the miter slots for an exact fit every time. The precision adjustability of the Incra really lets me dial in fine adjustments with ease. Once it is locked down, it is extremely stable.

Having the fence mounted to the base has also allowed me to mount the fence to the drill press using clamps to hold it in place (an idea that came in one of the Incra books).

The Incra is a bit pricey but also solid, precise and versatile.

Re: Router Table top Recommendations

#5

Re: Router Table top Recommendations *LINK*

Dave Bair

I like my Veritas table top. It's basically a 16" x 24" steel plate that I use as wing on my table saw. I use the saw's fence for the router table; you'll need something else.


Lee Valley Veritas router table top

Re: Router Table top Recommendations

#6

Re: Router Table top Recommendations

roger lance

Bart....you could go to the New Yankee Online site and look under the store for item 0301 Deluxe Router Station which is the new version....there is a picture that shows the improved fence....if you did not built this version, then maybe this might hold some interest for you.

Re: Router Table top Recommendations

#7

Bart Goldberg

Re: Router Table top Recommendations

Bart Goldberg

Rodger,

I am not interested in building another version of Norms table and fence. Some folks like building tools, I like building furniture. In fact, if you do make your own tools, and they are lacking in precision, your work will suffer. I prefer to spend my time building furniture and like to use well made tools, just not ones I make.

Regards

Bart