Longevity of the production of our efforts *LINK*
Keith Newton
Just over a year ago, Ben Jackson my assistant and I built this loft. Yesterday, we took it apart, to go into storage.
This took several months, and Ben didn't even get to see the finished product, due to heading out to Washington state to help his brother with a kitchen project.
Shila, our patron, had recently lost her husband to a surgery gone bad. She sold their home, then bought this condo, to move along with her life. This small second bedroom, 12 x 12.5' x 16' tall, was barely large enough for two beds for her grandkids, leaving no room for play, or just hanging out. When she showed me the little room, and ask if I thought I could build a loft in there, I instantly visualized this loft, with a see-through floor, to avoid dividing the room, making it feel even smaller.
As it turns out, after Shila moved in, she found it was not suitable for her and her two dog friends, so she sold the condo, and has moved again. The new owners didn't want the loft, so it is now headed to a storage room somewhere, unless someone out there needs a bit more room for their space.
While we really enjoyed creating this, it is just a shame to see, what could could arguably be the pinnacle of my "Arborescent Series" heading into obscurity. I didn't even have decent photos, until I took these with the fisheye on my iPhone.
I'm sure most of you viewing the reciprocal grid floor, which has a polycarbonate walking surface, will wonder about its integrity. The method goes back to the 12th century, and is even in Leonardo Da Vinci's sketchbook. Of course, back then, the joints were simple end shiplaps, which had the inherent weakness of only being as strong as it's weakest point, which could lead to catastrophic failure if just one part broke. However, my method is to use sliding dovetail, which keeps the full height of each beam intact, and the glue locks each joint, turning the whole structure into a virtual panel with about the same properties as a stress-skin panel of the same thickness.
http://www.flickr.com/photos/7391658@N03/sets/72157632948680890/





