Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Miniature Furniture Help...

Posts

Miniature Furniture Help...

#1

Miniature Furniture Help...

Derek Arita

Wood is getting so expensive these days, that I can't afford to build like I used to...this is after all, a hobby for me. As a result, I'm thinking more about trying to build miniature furniture or what used to be called, salesman's samples. Does anyone have experience with this? Do you use plans for full sized furniture and size it down or is there a difference in construction of miniatures?

Re: Miniature Furniture Help...

#2

Scale the plans down

John in NM

Most of the construction will be along similar lines to a full scale piece, except sometimes you should be able to get away with simplifying joints - like say rabbet joining drawer boxes.

One thing to consider is whether there is appropriately scaled hardware available for the piece you want to build. For some pieces it would be easy enough to make your own (see David Barnett's post about copper work over on the handtools forum).

Re: Miniature Furniture Help...

#3

other ways to save $$ on wood

Robin Corell in Atascadero CA

The cost of lumber is the reason I got into milling my own wood 20 years ago. At the time the used chainsaw and alaskan mill I bought were about the same as the wood for a piece I wanted to make. Ive spent some more money on parts and chains over the years but I still have that same saw and it sits on a shelf above the door in my shop. Currently I have over 100 slabs of walnut stacked up outside my shop along with a nice variety of other wood that only cost me a few $$ for gas and oil and a bit of time.

There are also a few small sawyers aroung and if you buy green wood and let it air dry you can save a ton of money. Woodmizer will give you some contacts for guys in your area with mills and often they will sell you some wood. There is some nice walnut, elm, ash, and black oak growing around where you live and all of it makes nice furniture.

I'm 5 hours south of you but I have a really good sawyer in san luis obispo that I buy wod from occasionaly and he has very good prices and often has some spectacular wood, right now he has some of the nicest sycamore I have ever seen. The catch is most of what I get form him is green, but he does hae a kiln.

Robin

Re: Miniature Furniture Help...

#4

Re: other ways to save $$ on wood

Derek Arita

Thanks for the tip. That's a really good idea that I hadn't considered. There's got to be some small sawyers around that would give me a good price. Thanks again!

Re: Miniature Furniture Help...

#5

How would salesman's samples satisfy your output?

Howard in Toronto

Do you mostly make furniture? For use at home? In your shop? As gifts?

Why not simplify your life and expand your creative possibilities at the same time.

How about getting into veneer work using either MDF or birch ply for the substrate.

Re: Miniature Furniture Help...

#6

Scale . . .

steve mackay

I mostly do military equipment but have done doll houses and / with furniture. I use the real plans and scale down but my ultimate goal is to lay ruler on the real thing. I also figure that the challenge to MYSELF is to use the same methods. Over the years I've realized that the greatest contribution to my miniatures has been Ol' Norm. With creativity and imagination you can do anything he does with his machine menagerie using small hand tools. Also, there IS a market for what you have in mind with the doll house/miniature/"salesman sample" furniture. They are a rather small sub-culture but will pay well if you can find them. And the folks practicing the craft are even harder to find. We are a strange lot.

Re: Miniature Furniture Help...

#7

Re: Miniature Furniture Help...

John Lucas

Make other things that are smaller and use less wood. Before I could afford to build furniture I build jewelry boxes, candle holders, clocks, all kinds of boxes.

Of course if you really want to cut down on wood expenses get into turning and turn green wood. Ooops, now forgot about the turning vortex. Once sucked in you'll spend more money on tools and lathe accessories than you ever did on wood. Not to mention the chainsaw and bigger bandsaw so you can cut up all that free wood. Oh yea and then there's the 4 wheel drive truck you need to haul it. Never mind.

If you decide to go small go doll house scale. It an awful lot of fun.

Re: Miniature Furniture Help...

#8

Steve - about your post

Howard in Toronto

I've often thought doll house furniture would be fascinating to produce.

There's a store here that sells all what appears to be a huge selection of doll house gear. To my ill-educated eye, their stuff looks generic. If one is doing this commercially, I'd suspect there'd be a fair bit of interest in custom furniture doll house size.

Judging from your post, I seem to think you do woodworking commercially. If that's so, where's your website?

Thanks.

Howard

Re: Miniature Furniture Help...

#9

Re: Miniature Furniture Help... *LINK*

Bruce, a MN Galoot

Take a look at William Robertson's work. If not the very best, he's in elite company. There's no one better. His work is to scale and made using joinery found in the full-size pieces he copies.


William Robertson

Re: Miniature Furniture Help...

#10

Re: Steve - about your post

steve mackay

Sir, I really wouldn't call it "commercial". I just make "stuff" in the back yard and attempt to get it in front of the right people. THAT is the challenge. If I may lay my little cathartic trip on you : I got tired of paying fourty bucks for a plastic model kit that lasted a week. (I'm a "busy" kind of guy) Why not make my own ? Out of a 2x4 ? Employing my Boy Scout Woodcarving Merit Badge I got pretty good at it. The model companies don't make a lot of stuff old GIs want. I DO ! After that folks start asking : "Can you make this ?" and on and on. Next thing you know you're making grandma's heirloom dining set three inches high. General Dynamics would like a "high-end" model of their new military assault vehical for their board room in Yeman. I can tell ya', there IS still a market for craftsmanship. Just not go'n to get filthy rich doing it. As to getting rid of the stuff, there are more avenues than you think that run cheap. My biggest one now is Facebook. You can set up a "fan page" for free. Then you start trolling all the "groups". This is a WORLD WIDE auddiance ! FOR FREE ! Just Google Steve Mackay, Model & Pattern Works. Yes ! A Facebook fan page shows up on a Google search ! AND I'm move'n up on the results "list". (I'm up to page 2 1/2 of the results. Right after the sax player)