Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

Posts

Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

#1

Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

Stephen Kirk

I'm starting to make my own veneers. I want to pick up the Woodslicer blade that now comes in 3/4", as well as the 1/2". Does getting the 3/4" blade gain me anything, or might there be problems tensioning it? The Jet 14" Deluxe is rated to 3/4" max blade width. Price is negligible between the two blades.

Btw, using the stock 1/2" 6 tpi blade yields some pretty poor results. Slow and prone to burning.

Re: Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

#2

Re: Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

Brian in SLO

The Woodslicer 1/2" is a good blade for the 14" bandsaw. The 3/4" is too much blade to tension, as you suspected. I have the 1/2" Woodslicer and have been nothing but happy with it for resawing.

I know there are some other blades out there others might recommend but the Woodslicer is right up there with the others.

Re: Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

#3

Re: math

Lars Parrington

i have both 1/2" and 3/4" woodslicer for my 14" delta, but have never put the 3/4" on. the 1/2" lives on the saw.

as i understand it, what matters is the cross-sectional area of the blade.

a typical 3/4" blade is .032" thick --> area = 0.0240 in^2

woodslicer is .022" thick --> area = 0.0165 in^2

a typical 1/2" blade is .025" thick --> area = 0.0125 in^2

if your saw struggles to tension a 1/2" blade, it will struggle a bit more with the 3/4" woodslicer, but not anywhere near as much as with a regular 3/4" blade.

Re: Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

#4

Re: Resaw blade, 1/2 or 3/4 on Jet 14" Deluxe

Larry in nw ohio

Stephen I have an old 12" Craftsman Bandsaw from about 35 years ago and for just out of couriousity I bought a 3/4' blade for it. I was able to just get it on and it worked very well. I didn` need to tension it just a lot but it took just enough and it seemed to work fairly well. I do use it once in awhile when I really need to, better than having to buy another saw. Larry in NW ohio