I have a job coming up where I will need a scroll saw. This is not something I see using a whole lot in my shop so I don't want to spend too much. I was wondering if you guys could provide me with some guidance on brands/models to consider.
There is one on CL -Delta 16" for $150. No model # is listed.
Especially if you don't see yourself using it all that often.
But the vibration is cheaper scroll saws can be exhausting - even if you clamp them down. The DeWalt unit has very little vibration - pretty well zero vibration.
You can find refurbs at really good prices at different places. Oh how I envy you Americans!......
Agree with the above, anything less than DeWalt is just gonna be annoying. If you are in a city, you can probably find a DeWally on CL. If you buy a new one, you can probably sell it back for half of what you paid for it.
There are lots of scroll saws better than the DeWalt, but if this is a one-off thing, just do it and move on.
If you go with that delta you will need to buy a saddle and some spurs to tame it with. We have one of those and two dewalt 788's at school and the delta has not been used since the dewalt's were purchased.
The dewalt is much smoother and has way less vibration it also has a well thought out work hold down and a nice little blower for keeping the swarf away from the line you are trying to follow. the blade clamps and tensioning system are also well thought out and quick and easy to use and require no tools.
Not sure if it would be an option, but the smallest blade in a bosch jig saw with the jig saw clamped upside down in a vise will do a decent job as a scroll saw
I did just that and used my Bosch jigsaw with small blades for fine work before i had a scrollsaw. I coped all the molding in my house with my scrollsaw, that is the pieces less than about 6 ft in length......
I love mine, probably haven't used it enough, but the DeWalt is worth it in my opinion.