Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E Peacock

14 Jan 2013

Good Morning Everyone,

The rain has now moved on and we got some very much needed rain. I went out to the shop and emptied about 45 gallons of water out of the containers scattered around the shop to catch the dripping water. Metal building with a metal roof. It has always leaked from the time when we bought the house and I've never been able to stop the leaks. I just don't know anything about metal roofs. If it was a shingle roof, then I'd know how to fix the leak. So, I keep buckets and plastic containers scattered around the inside perimeter of the shop and empty the water on a regular basis.

I'm oncall this week and will be every 4th week now due to changes at work. I haven't finished the bowl for my neighbor yet, but I hope to soon. We managed to stay dry this weekend with all the heavy rains, but now it's back to a fire in the stove and below freezing morning temps.

That's it for me, so what did you do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments.....

#2

Rosette

GolfSteve in Calgary

My wife kindly looked after the kids for half of the weekend so I could focus on woodworking for a few hours - what a difference having a few hours to concentrate on a task makes in comparison to 45 minutes here and there helter-skelter. The rosette is about 70% finished now that the maple burl is glued in.




Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

Gary Smyth

As it happens on a Saturday drive, (doing all I could do to avoid a tile grouting project) I unexpectedly passed a barn/house sale. The drive way was mud and long, but vehicles of all sorts were parked out beyond the entrance. Had to look. The owner's were headed to warmth of New Mexico. I was much too late for the John Deere, the two post car lift, I beam trolley, wood w iron wheels railroad carts, welders, grinders, vices, hundreds of BF of cherry, woodshop heavy's, and drawers and drawers of stuff. Trucks were loading like crazy. I was 20 miles out and late in the afternoon, but I found this Chestnut chest for 1/2 price. What you see is upside down at home and just in time out of the rain. Problem then was it didn't fit into a Honda coupe -- and it had to be out by 11:00AM, yesterday, Sunday. My weekend work was getting it home. Between church, hunting, and football the local Uhaul decided to not be open Sunday. It involved calling more than a few people, negotiating a favor, and behold'in for some of my time for a future date. Not the greatest find considering what was sold beforehand, but it is in decent shape, manufactured, I think a pencil name or model, and a date written on the underside of a drawer of 1931, has a nice serpentine front, a 10" deep drawer, and had a "strongbox" behind the swing door. As it was deep in a corner and had a religious shrine on the top, I doubt anyone bothered to open the door/drawers (by the way, the safe was empty -- even if it wasn't.)

Re: WC Weekend Accomplishments.....

#5

Re: WC Weekend Accomplishments.....

Bob Lasley

Hey Dennis,

Was a wet, then icy weekend here in Okieland. I'm finally gettin' back in the shop. Started building the miter saw cabinet/stand in the newest issue of Shopnotes and managed to at least get most of the pieces cut out before I ran out of weekend. Once I get this project and a couple more "shop organization" projects done, I might actually get started on some furniture projects. My family has already provided a lengthy wish list.

Take care my friend,

Bob

Re: WC Weekend Accomplishments.....

#6

Ellis Walentine

Turning spalted maple

Ellis Walentine

I spent a lot of time with my chainsaw, bandsaw and lathe this weekend. Here are a few shots of the three pieces I turned, with some opposite-side views of each. Only the first one has a finish at this point. The other two will get something different -- probably a varnish of some sort for the bowl and just a wax for the contrasty pot. The hollowforms are nearly identical in size at about 6" dia. The bowl is about 10" or so.

It was a lot of fun booking some quality shop time, and my big bandsaw got a tune-up out of the deal.

Ellis







Re: WC Weekend Accomplishments.....

#7

Re: Turning spalted maple

roger lance

Nice....graceful, beautiful forms....gotta love that spalted wood!

Re: WC Weekend Accomplishments.....

#8

Believe it or not: baking bread

John McGaw

I didn't do any woodworking at all but I did try something I've wanted to do for years -- I learned to bake bread. Well, at least one sort of bread. After four loaves in a week I can say that I've got it down pretty well and that my homemade rustic bread tastes way better than anything Panera has sold me and costs maybe 1/8th as much. Now, if I can just avoid baking and eating too much of it...

Re: WC Weekend Accomplishments.....

#9

Shop help...

Scott in Douglassville

Hi, Dennis -

I finally got the garage/shop cleaned and reorganized, and am ready to start up some new projects. More importantly, though, my in-house shop helper immediately joined me. Showed her some hand tools, and she had a blast. We're planning some projects now...




Re: WC Weekend Accomplishments.....

#10

Leaking Metal Roof

Stuart Johnson

My shop has a metal roof and finding leaks was a real pain. It turned out when the roof was installed the workers would miss a rafter from time to time. They would then back out the screw and re-install it leaving a little hole. These would leak just enough so the water would run down hit a rafter and finally drip somewhere across the shop. I fixed it by carefully going up and down examining all the attaching screws and looking for misses. Once found I just ran one of the left over installation screw in it. Since then I haven't had any leaks. Of course the last statement probably mean this current rain will leave a bunch of puddles more than likely on my tablesaw.

Re: WC Weekend Accomplishments.....

#11

Re: Turning spalted maple

Mike Rubes, Apex, NC

Hi Ellis,

Those are great. My first thought about the 3rd pic down was that you had burned the outline of a leaf into the spalting pattern, but then I realized it is just the pattern itself. That is awesome.

Very nice form on all of them. Glad you could get some quality time in the shop. That's why we have all this stuff, right? :)

Mike

A brief return to winter today in Apex, NC...

Re: WC Weekend Accomplishments.....

#12

Beautiful pieces Boss!