Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Table for Big Green Egg Cooker

Posts

Table for Big Green Egg Cooker

#1

Table for Big Green Egg Cooker

Barry

A friend of mine got a Big Green Egg for Christmas and plans to build his own table, that would surround the cooker and provide a staging area for containers of food and plates. I noticed there are several free plans available on the internet. Some advise the use of treated lumber, even treated deck boards for the table surface. Is this a good idea, considering the toxic nature of treated lumber? They used to advise that you wear gloves to handle treated lumber. The table top probably would not be used as a food-contact surface, but still I would worry about indirect contamination of foods. What do you guys think about this? Thanks.

Re: Table for Big Green Egg Cooker

#2

Re: Table for Big Green Egg Cooker

Merle

IMO, anyone that can afford a BGE, can afford the lumber to make a decent table. White oak, ipe, cypress, even, cedar come to mind as suitable choices. The BGE is a centerpiece; treat it as such. He should be proud of the egg, don't surround it with plastic or, potentially, harmful chemicals. Others may have different opinions, others might be incorrect! :D

Re: Table for Big Green Egg Cooker

#3

Re: Table for Big Green Egg Cooker

Dick Coers

I'm with Merle. If bugs don't eat it because of chemicals, I don't want to put food on it. It can't be that big of a table, use the good stuff. I would not use western red cedar unless you can get old growth. The second and third growth just doesn't have the rot resistance that the old stuff did. Another good tip I read once for outdoor wood chairs was to turn the chair upside down, and build a tape damn around the bottom of the legs. Then pour a 1/4" thick epoxy "cap". The epoxy also soaks into the end grain and seals it. Provides a great barrier from water where the wood is most susceptible.

Re: Table for Big Green Egg Cooker

#4

Re: Table for Big Green Egg Cooker

Barry

Thanks for the opinions, that's about the way I was leaning but it's not my grill. I can't afford a BGE, at least not until I recover from Christmas 2012!

I was thinking that cypress might be a good choice. Teak is probably an even better choice, but probably way too expensive and maybe not even available in this area. The table would probably cost twice as much as the BGE. IPE might be a possiblity.

Re: Table for Big Green Egg Cooker

#5

Re: Table for Big Green Egg Cooker

Dave Bair

Ah, the English language. I had the hardest time figuring out that your post had nothing to do with cooking eggs. In that case I guess it would have properly been "Big, Green Egg-Cooker". I take it that this is a grill of some sort; I'll Google it later.

Re: Table for Big Green Egg Cooker

#6

Re: Table for Big Green Egg Cooker

Larry in nw ohio

Yes it`s a BIG GREEN GRILL, my son had one for about 5 years now. I have never seen or heard of such a thing till I saw his. Larry

Re: Table for Big Green Egg Cooker

#7

Re: Table for Big Green Egg Cooker

Brian

MMMMM Barbeque

Brian

Re: Table for Big Green Egg Cooker

#8

Bart Goldberg

Re: Table for Big Green Egg Cooker

Bart Goldberg

Barry, I have a Bradley smoker that I also needed to make a a table for. As with the grill, it needed to be weather resistant, so I used Ipe from my local lumber yard. I made the legs from spindles and decking boards for the table top (not a flat panel, but with some space between the boards like a picnic table top. Ive had it outside now for about 4 years and its still looks great - just needs to wiped down once in a while to clean off any food.

Regards

Bart

Re: Table for Big Green Egg Cooker

#9

Re: Table for Big Green Egg Cooker

Barry

That's sounds like a god choice. I had already thought of Ipe. I had even thought of using Trex decking for the table top. Thanks.

Re: Table for Big Green Egg Cooker

#10

I'll second cypress

Jason Waters

I'd probably use cypress due to availability and cost. Availability in your area may lend to a different wood. I realize the BGE is expensive and deserves a nice worktable, but no need to get too crazy in my opinion. One thing you could do is go to a solid surface fabricator and find a scrap and inlay a nice cutting board....would be real cool if you could find a green similiar to the egg....

Jason