Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

China display cabinet

Posts

China display cabinet

#1

China display cabinet

Norm Knoxville

Is there a standard depth and distance from the back of a cabinet for the groove that plates are positioned in to display vertically? Thanks.

Re: China display cabinet

#2

Re: China display cabinet

don stephan

Wonder if the question might be is there a standard angle for displaying plates, as this would cover plates and platters of different diameters?

Re: China display cabinet

#3

Re: China display cabinet

Larry in nw ohio

Norm What I did with my china cabinet was to lay the plate on a flat surface and measure to the center of the rim and add a 1/16" or so, whatever looks good to you. No real science to it. Good Luck wirh your project and hope you post some pictures. Larry

Re: China display cabinet

#4

Re: China display cabinet

Hal

Measured our china cabinet (made by Ethan Allen - about 40 yrs. old) One groove at 3/4"+ and one at 1-13/16" from back. This arrangement works OK for our assortment of plates. Hope this helps. Hal

Re: China display cabinet

#5

Re: China display cabinet

Norm Knoxville

Thank you all! This info should do the trick. Norm