Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

A Stand for the Word *LINK*

Posts

A Stand for the Word *LINK*

#1

Alan Young

A Stand for the Word *LINK*

Alan Young

I delivered the Case on Stand for the historic "Brown's" Bible of the First Congregational Church -Ann Arbor Michigan. The timing for Reformation Sunday was a happy coincidence although the Congregationalists are not specifically descendants of the Reformation.


Rift Sawn Red Oak, Quarter Sawn Red Oak veneer,Brass. Finish is Mica Powder gilding, Minwax Red Mahogany and Jacobean stains, Minwax Antique Oil Finish-Shellac topcoat.











The case on Stand holds this edition of Brown's Bible of The First Congregational Church Ann Arbor.There is no date on the Bible but a specialist has estimated it dates from the 1870s which would make sense since the church moved to the present location about 1876.


Here is the opening plate from the Bible- click the link below to see more of these beautiful plates...Thanks for looking-Alan




Historic Brown's Bible-First Congregational Church

Re: A Stand for the Word *LINK*

#2

Stunning and appropriate

Mike Farinella

Well done Alan!

Re: A Stand for the Word *LINK*

#3

Absolutely Outstanding!!!

Ron in Sterling, CT

What a beautiful piece. Well Done. I think the finish is elegant, especially for Red Oak.

Ron

Re: A Stand for the Word *LINK*

#4

A work of biblical importance!

Thomas Skaggs, Foothills of Mount Level

Alan,

You did the good book proud!

T.

Re: A Stand for the Word *LINK*

#5

It's so elegant !  ..And wonderful details.


Re: A Stand for the Word *LINK*

#6

OMG, the floor!

Bill Tindall

The stand looks great until, through no fault of its builder, I saw it on the green floor. Maybe someone will donate a rug to put it on. Thanks for posting; it was an interesting read.

Re: A Stand for the Word *LINK*

#7

Re: A Stand for the Word

Dave Bair, Eaton Rapids, MI

Very, very nice Alan.

Re: A Stand for the Word *LINK*

#8

Re: A Stand for the Word

George Colonel

Good Morning Allan,

You did a beautiful piece of work on that one, Allan. Design and finishing details are unbelievably good. I like it very much. Its really "One For The Book"!

George

Re: A Stand for the Word *LINK*

#9

Book it, Danno!

Joanne in Point Pleasant, PA

I agree with Bill--great job on the stand, but that floor is dreadful! I particularly like the little gothic windows on the side. They nicely echo the gothic windows of the church and let in light to view the book inside.

Re: A Stand for the Word *LINK*

#10

Alan Young

You're right!

Alan Young

Maybe some orange shag would be better! :^)

Re: A Stand for the Word *LINK*

#11

Alan Young

Thanks all-A note on photos

Alan Young

A friend e-mailed me and said " I like how you angled the feet to match the curve of the harp portion."....I looked at the pictures and sure enough they seem to angle inward- from side and front views- But this is certainly and optical illusion-probably caused by the lens in my camera? Here's a pic from fabrication that looks "Normal" to me...


and yes that green floor is ugh!

Re: A Stand for the Word *LINK*

#12

Re: A Stand for the Word

Howard Norman

A great piece of work.

Re: A Stand for the Word *LINK*

#13

Rick L

Re: Faster Deterioration?

Rick L

Did you work with a Conservator who specializes in books? You could be speeding up the deterioration of the book. Wood is not the best storage for archival as there are acids that degrade paper. Sunlight is not good either.

I was one of many people who worked on the strorage desk for the Codex Leicester, the worlds most expensive book of $30.8 millon. Bill Gates purchased a Leonardo DaVinci Manuscript from Armand Hammer and needed something to store it in. Anyway the main cabinet was Mahogany and inside the cabinet are steel boxes with drawers with gaskets to seal out the atmosphere and all the materials in the drawer were chosen by the Conservators to be acid free.

Re: A Stand for the Word *LINK*

#14

Rick L

Re: BTW, nice piece...

Rick L

but I still question the Archival aspects.

Re: A Stand for the Word *LINK*

#15

Alan Young

Re: Faster Deterioration?

Alan Young

There is a "conservator" advising on this.... special-e glass is on order-This current display was for a special series of events at the church this weekend. The Bible is set on a special pad-designed as a separator between the leather and the wood surface. The little "Gothic"windows are open-allowing air to circulate. Perhaps some sort of fan should also be incorporated???? The topcoat on the wood surface is shellac-perhaps that isn't enough of a barrier? I am also told the church will be opening the book to different pages every week or so....

-Alan

Re: A Stand for the Word *LINK*

#16

Rick L

Re: Oak is the most dangerous...

Rick L

due to acids and must be sealed to the max. There are much better woods and even better other materials for rare books. Daylight is bad and the links give lighting info. Certain bulbs are preferred. Humidity and temperature are important.

http://www.nedcc.org/resources/leaflets/2The_Environment/05ProtectingCollections.php

http://www.loc.gov/preservation/about/faqs/general.html#exhlib

http://www.nps.gov/museum/publications/conserveogram/19-02.pdf

Re: A Stand for the Word *LINK*

#17

Rick L

Re: Book Cradles

Rick L

Doesn't sound like your Consrvator is very knowledgeable. If I'm not mistaken the book appears to be laid out flat at 180 degrees. I belive the links to be very credible and accurate.

http://www.nedcc.org/resources/leaflets/2The_Environment/05ProtectingCollections.php

If a volume is shown open, it should be supported so that the binding is not under strain. An open book must never be laid out flat (at a 180° angle). Open it only as much as its binding will comfortably allow. Because books differ in this respect, book cradles custom-made to fit each volume are recommended. Such cradles can be ordered from mount makers or made in-house; instructions are available in the conservation literature. Cradles should always be large enough to support the whole book. If the pages do not remain open naturally, a strip of polyester film can be placed around each side of the open book. The strip can be closed with double-sided tape. Commercially-made molded acrylic cradles or wedges, available in different sizes and angles from conservation suppliers, offer an alternative to custom cradles. At the very least, supports can be made with folded museum board or polyethylene foam wedges.