Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Looking for On-Line Auger/Forstner Bit Sharpening

Posts

Looking for On-Line Auger/Forstner Bit Sharpening

#1

Looking for On-Line Auger/Forstner Bit Sharpening

Stephen

I am looking for an on-line sharpening service for large diameter drill bits. I send my blades to Forrest, and use the Drill-Doctor for twist bits. But I wanted to send out the augers, Forstner, and Bormax stuff.

Any suggestions would be appreciated. I am more concerned about quality than cost.

Re: Looking for On-Line Auger/Forstner Bit Sharpening

#2

Re: Looking for On-Line Auger/Forstner Bit Sharpen

Jim Hoeller

I was given about two dozen auger bits of various sizes. Each needed sharpening. I turned to the web and searched on auger bit sharpening. One of the offerings was a Utube video that was excellent. It included details on a simple wood fixture to hold the bit, position it in a vise and use Nicholson's auger bit file to restore the cutting edges. I ordered the file from Lee Valley.

Re: Looking for On-Line Auger/Forstner Bit Sharpening

#3

Re: Looking for On-Line Auger/Forstner Bit Sharpen

Larry in NW Ohio

Stephen I get my saw blades sharpened at Ridge Carbide Tool Corp. in Lyndhurst, NJ. I think they do a great job, no complaints. I don`t know if they do what you want done. You can try to call them @ 888-728-8665, or email them @www..carbidetool.com if you would want to you can ask them for a catalog. while your at it. Good Luck. Larry