Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Verdigris finish

Posts

Verdigris finish

#1

Verdigris finish

Mark underwood

I would like to apply a realistic verdigris finish on a few of my turnings - any suggestions?

Re: Verdigris finish

#2

Re: Verdigris finish *LINK*

Robin Corell in Atascadero CA

Sculpt nouveau makes a product that is basicaly finely ground metal powder suspended in a waterbased polymer. you can paint it on anything and then apply any cold patina and it will look like metal. try the bronxe metal caoting and tone and their tiffany green patina, it is very convincing and that comes from someone who uses traditional hot patinas on cast bronze.

You will get the best results if you apply the patina when the coating is just barely dry. I have seen this product applied to wood, paper, and ceramic, all with very convincing results.

Robin


http://www.sculptnouveau.com/index.cfm

Re: Verdigris finish

#3

question

Bill Tindall

I don't any familiarity with these materials but the discussion has perked my interest. Are you saying that this coating can be applied to a wooden vase , to take some example, and it will look like it was aged copper,brass etc?

Can the object be handled, ie. is the coating durable?

Re: Verdigris finish

#4

Re: question

Robin Corell in Atascadero CA

yes to both questions. here is an over simplification: The prduct is esentialy a water based glue with a bunch of metal powder mixed in. when the "glue " is dry but not quite cured a traditional cold patina is applied which reacts with the metal powder to create a patina. as the "glue" cures it becomes a barrier coating and the metal becomes less reactive, to the point of not taking a patina if you wait too long.

I have seen the product applied to paper and it truely makes the paper look like aged metal. same for wood or ceramic.

My uneducated guess is that this is where David Marks gets all his supplies

Re: Verdigris finish

#5

Re: Verdigris finish

Mark underwood

Thanks Robin I will give it a try - Mark Underwood