Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Thin Hardwood

Posts

Thin Hardwood

#1

Thin Hardwood

Larry

I'm looking for a supplyer for Thin Hardwood ,1/16 to 1/8.

Thanks

Re: Thin Hardwood

#2

Hobby shop?

Bill Houghton, Sebastopol, CA

Depends on the quantity and species you need, I guess; but it seems to me some hobby shops used to offer this kind of thing.

Re: Thin Hardwood

#3

Re: Hobby shop?

Larry

Not around here.

Re: Thin Hardwood

#4

Bob

Re: Hobby shop?

Bob

Do you have a Wood Craft Store? Someimes they sell packets.

Re: Thin Hardwood

#5

thin hardwoods - 2 sources in NC

Henry (Raleigh, NC)

ThinWoods.com and Steve Wall Lumber in Mayodan NC both sell thin wood.

Henry W

Re: Thin Hardwood

#6

Re: thin hardwoods - 2 sources in NC

Jim Toews

I've bought 1/8" at both Rockler and Woodcraft stores in Seattle. I was able to find it on their websites, but I had to hunt around a bit.

Re: Thin Hardwood

#7

I gave up . . .

steve mackay

When I need anything like that I just get a 3/4 at the warehouse and take it to the millshop down the street with the big planner and Time Saver sander. Once stock goes under 3/4 it becomes "dimensioned". Then the price triples. I buy my $30 board, pay the dude to plane it down for twelve bucks and I've still got it cheaper than if I bought it that way. Plus I get to shoot the breeze at the lumber store AND the mill shop. Normally makes for a decent morning (my Dude at the millshop likes old hand tools also). When I get home I've got stock that is EXACTLY "my way".

Re: Thin Hardwood

#9

Re: Thin Hardwood

Larry Clinton At Frankfort, (Central) Indiana

Both WoodCraft and Rockler carry 1/8 and 1/4" thick wood - They are very proud of it however and you will really pay ($10+ per SQUARE foot). Don't know your location, if you are near other woodworkers like me, you might talk them into milling down some wood for you. Most can take rough 1", joint one side, split it on the bandsaw and plane to 1/4" thick pretty easily. To go to 1/4 requires a carrier board through the planer.

Re: Thin Hardwood

#10

Re: Thin Hardwood

Larry in nw ohio

Larry Where do you live? I made some just the other week, and what kind of wood do you want and how much of it? Larry

Re: Thin Hardwood

#11

luthier supply?


Re: Thin Hardwood

#12

Re: Thin Hardwood

kruizen

Certainly Wood out of East Aurora, New York has 1/16 veneer in several species