Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Take the warning..... (OT? I think not)

Posts

Take the warning..... (OT? I think not)

#1

Take the warning..... (OT? I think not)

Barry Irby

I have criticized people for being slow learners and getting the message. I criticize the local power company for simply putting back up all the stuff that the hurricane knocks down, without improving it.

About a week ago I was installing gutter guard on one of my rental houses. $100 worth of gutter guard and I never have to clean the gutters again or pay somebody to do it. I was up on a ladder Putting it on. (Easy, according to the package.) It required quite a bit of pulling and tugging. I slipped and lurched a bit. A few minutes later I slipped again and launched myself off the ladder and fell about six feet onto the side walk. Splat, right on my hip. Don't think anything is broken, but man is it painful. Been hobbling around for a week.

So the message is, in two parts. Don't do stupid stuff and when you get the little warning, pay attention and take it to heart. We all have work shops and we all do things that are more or less dangerous. Lets try for the less dangerous.

Re: Take the warning..... (OT? I think not)

#2

Re: Take the warning..... (OT? I think not)

Joe in a Cleveland suburb

Sorry about your fall Barry.

I did a stupid thing myself yesterday...

I did not listen to what my dad told me many years ago, 'always unplug the drill before changing bits'. I was un-chucking a bit in a big 1/2" drill. I hadn't unplugged it. Guess what happened? Ouch.

I thought I broke my finger. I didn't but ended up with a nice gouge, a couple cuts, and a sore middle finger this morning.

Joe

Re: Take the warning..... (OT? I think not)

#3

Re: Take the warning..... (OT? I think not)

Clementine

Why do we think we know better than what we should clearly know? Like "blade guard" not meaning protecting the blade from your arm. Or "face shield" not meaning keeping your face from damaging the drill bit. So we remove blade guards and leave the face shield on a hook. Aren't we sharp?!!

Re: Take the warning..... (OT? I think not)

#4

Thank you ! . . .

steve mackay

You're right ! It takes someone posting here to put us all back on the straight and narrow. Been awhile since an incident here. With this, hopefully a bit longer.

Re: Take the warning..... (OT? I think not)

#5

Thanks for the reminder...

Don Orr

...and I'm glad it wasn't worse for you.

Let's be careful out there.

Re: Take the warning..... (OT? I think not)

#6

Battery electric drill hazard

Bill Howatt

Your incident with the drill caused me to recall a problem I've had with battery operated drills. I take tools from the shop outside to do some work and then need to bring them back. I often gather several tools and whatever into my arms. On the trip back to the shop something pushes on the trigger of the drill and the next thing I know I am substituting for a piece of wood. What's worse, and this is what Barry is reminding us, I didn't learn from the first time and I've drilled myself at least a second time, or is that a third time.

Bill

Re: Take the warning..... (OT? I think not)

#7

Man Barry, sorry to hear it...

John in NM

Gutters, ugh... hate 'em :D

Hope you heal soon. No idea what to do for bruising, but I do really like ice and advil for back pain - but that's irritated nerves more than a big old bruise.

Re: Take the warning..... (OT? I think not)

#8

Bob

Re: Take the warning..... (OT? I think not)

Bob

I know exactly what your talking about. When I first got into wood working I went to a show and bought about 8K worth of equipment from money I got when I retired for vacation time I did not use. I bought everything off the floor at the show including a JET contractor saw WITHOUT a blade guard! Never gave it a thought and hooked it up and was cutting a piece of walnut that had a knot.. BAM kick back! the result was my right index finger was split open like a shrimp to the first knuckle. After about six weeks, still in pain I sold everything and was never going to do wood working again. I had never heard of a push stick but I did know about machine guarding though never put two and two together. My finger healed very well, I do have some nerve damage at the tip and a bit of missing bone at the tip. Fast forward two years... I have an 800 sq foot shop with ever tool you can think of including a Delta Uni-Saw see the photo You will notice No guard which is due to the out-feed table. I'm scared to death of this thing and I do use a push stick or configure some sort of jig to keep me out of harms way and stand to the side for all cuts. I use my band saw as much as possible as well. I am trying to find a splitter and an over head guard with a vacuum port. Delta does not make a shark fin type splitter so if anyone knows where I can get one please let me know.

Re: Take the warning..... (OT? I think not)

#9

The best part.....

Barry Irby

I was lying there on the ground, sweating, tangled up in the ladder. My son ran over and moved the ladder. I lay there a few minutes and finally opened my eyes. There were two vultures circling above. I thought, no boys, not yet. Got up and hobbled away.

Re: Take the warning..... (OT? I think not)

#10

Re: Take the warning..... (OT? I think not)

Barry Irby

I sometimes find myself standing there thinking I should have learned something from what just happened, but I am not clear on what happened or what I did wrong or what I should learn. Sometimes the moment passes and I learn nothing.

Re: Take the warning..... (OT? I think not)

#11

Re: "Yellow wheels"

Hal

I rarely see any mention of the "yellow wheels" (rotate in one direction only) that are mounted on your fence to prevent kickback. They also hold your workpiece down to the table and against the fence. I've had them on my saws for 25 years and the only time I've had a kickback has been when trying to rip a piece too narrow for the outfeed wheel to hold and guide. This is of course stupid and the obvious answer is to flip the board over so the narrow piece is the offcut. I know you can get the wheels and the mounting bar from Griz, and no doubt from many other sources. Not expensive. I feel very safe with them, and they're rarely in the way. One man's opinion. Hal

Re: Take the warning..... (OT? I think not)

#12

Jesper, Denmark

Re: Good one....

Jesper, Denmark

When you lie there and after a few minutes/seconds get pissed off at yourself, you know that you will eventually be OK.

Re: Take the warning..... (OT? I think not)

#13

Shark Guard

Merle

Bob, I have one of these and it does a great job with dust collection and has a splitter built in. The downside is that it doesn't work for dados and the lead time from order to delivery was about 3 months IIRC. Hope this helps.

Re: Take the warning..... (OT? I think not)

#14

Bob

Re: Shark Guard

Bob

Who is IIRC? I may not have heard of them I have an email I sent to Shark Guard about the SGK1.

Thanks

Re: Take the warning..... (OT? I think not)

#15

"If I recall correctly"


Re: Take the warning..... (OT? I think not)

#16

Re: Take the warning..... (OT? I think not)

Jim Dillon

Barry,

Glad you are OK. I did the same thing maybe 20 years ago. Placed the ladder directly above a patio door, but because a window was directly above the door, I had to angle the ladder too far out. I still remember getting about 2/3 of the way up the ladder and suddenly thinking that something wasn't right. The ladder came crashing down, and I fell off to the side luckily only bruising my hip. Amazingly, the ladder struck the patio door on the way down, but the glass did not break. Sure taught me a lesson on ladder safety.

Jim

Re: Take the warning..... (OT? I think not)

#17

Re: Shark Guard

Merle

I apologize, I thought that was a standard abbreviation.

Re: Take the warning..... (OT? I think not)

#18

Ever tried two push sticks?

John in NM

One in each hand. The right hand one is whatever pusher you prefer to use, the left hand one is just a stick with a wedge shape and a little square cut in the end. It's used behind the blade to hold the kerf open like a splitter and also to push the work against the fence if necessary. Works really well, gives you a lot of control without having to spend a lot of set up time and your hands are always far from the blade.

Re: Take the warning..... (OT? I think not)

#19

Bob

Re: Shark Guard

Bob

What does it stand for?

Re: Take the warning..... (OT? I think not)

#20

Bob

Re: Shark Guard

Bob

OH I got it "If I recall correctly"

Re: Take the warning..... (OT? I think not)

#21

ReBob

larry in nw ohio

Bob If any more acroyms come up that you do not recogize just go to www acronyfinder.com and you can find it there. Larry

Re: Take the warning..... (OT? I think not)

#22

Re: Shark Guard

Andy

3 months for delivery, you did pretty well. I'm at 16 weeks and still waiting.

Re: Take the warning..... (OT? I think not)

#23

Bob

Re: Shark Guard

Bob

They told me 23 weeks I dont have it yet. gezzz 16 I could make one with a file in that time.