Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Lacewood?

Posts

Lacewood?

#1

Lacewood?

Jerry Nicholson

Some wood I purchased from lumber dealer near Hutchinson Kansas has the following website description:

Lacewood

Also Known As: Silky Oak, Selano

Source: Queensland, Australia

Density: Hard

Texture: Coarse

Grain: Straight

Color: Pinkish Brown

Comments: Inlays & veneers. Available in stock in 4/4 thickness.

This stuff is heavy and much harder than red oak. It also makes a lot of little splinters! Is there anything special I should know about it, such as edge gluing problems, wood movement, or health warnings? I don't have a lot and will be using as a floating panel (about 8 inches by 12 inches) in the lids of some walnut keepsake boxes I am building for my grand daughters. My scrapers don't seem to work too well on it but it is fairly easy to sand. I will probably shellac it, followed by wipe-on varnish. Should I fill it? I don't plan to stain it.

Jerry

Re: Lacewood?

#2

Re: Lacewood?

Robin Corell in Atascadero CA

A friend of mine has a dermal allergy to silk oak dust. Not sure how common it is to be allergic to it. It is fairly common as a cultivar in California and my frind reacts when working it green.

Also despite the common name it is not an oak.

Re: Lacewood?

#3

Re: Lacewood?

Don Orr

I know of at least 2 turning friends that have almost died from being exposed to the dust while working it. I have not had a problem myself, but have not worked with it very much.

Pretty wood-great ray fleck patterns.

Re: Lacewood?

#4

Re: Lacewood?

paul in AZ

I've used it several times recently. The biggest is a tall cabinet of mahogany where I resawed the lacewood for door panels. Next a hallway table -all lacewood. Then a jewelry box with left-overs.

No problem working it. Machines and sands well. Small splinters are a nuisance. Glues well.

I finished with shellac, sanded between coats and then varnished.

For a while I was tempted to try filling it but found that a couple or three coats of diluted shellac sanded out well did the trick.

Nice wood.

Re: Lacewood?

#5

I thought it was Licewuud.

Keith Newton

I've used it, and enjoyed working with it. To entertain myself, I would try to find ways to work it into a sentence where I could mention it with an Australian accent.

Re: Lacewood?

#6

Re: Lacewood?

Brint in Richmond, VA

Just another voice here to testify about a woodworking friend who had a severe allergic reaction. That's not to say you shouldn't work it -- just be especially careful with dust collection, etc., and pay attention to your body.

Re: Lacewood?

#7

Re: Lacewood?

Sgian Dubh

I've not come across the name Lacewood to describe what I've always known as Australian silky oak Jerry. I'm a little wary of your lumber dealer's description, although I'm conscious of the fact there are differences between American usage of English and British English. What makes me wary is that the dealer doesn't appear to provide the Latin Cardwellia sublimis that describes the tree precisely (unless you omitted it in your lifted description). Lacewood, in British English, and therefore sold here in timber yards, refers to the European plane, Platanus hybrida. Australian silky oak would almost certainly not be sold as 'lacewood' here to avoid confusion.

Nonetheless, I concur with others in this thread who report sensitivity and allergy to Australian silky oak, which isn't an oak at all of course. Slainte.

Re: Lacewood?

#8

Re: Lacewood?

paul in AZ

Sgian pints out another of many confusions in the naming of lumber and the imprecision of a common name.

The one local yard that lists botanical names has lacewood as Panopsis rubellens. No guess as to how accurate that botanical designation is.

The various lacewood-looking lumbers includes lacewood; leopard wood; silky oak and maybe other names for woods that have the 'flake' grain patterns. http://www.hobbithouseinc.com/personal/woodpics/_discussion_sycamore.htm

Safe to say that "lacewood" as used in lumber yards is a phenotype and that the observable ray flake grain pattern is found in a number of botanically discrete woods. That could easily explain the differing reports as to allergenicity.

Re: Lacewood?

#9

Re: Lacewood?

William Duffield

My understanding is that Silky Oak, or Northern Lacewood (also the species that is planted as an ornamental in CA and FL) is Grevillia robusta, while Southern Lacewood is Cardwellia sublimis. I used to have a silky oak growing in my front yard. I don't know which one is supposed to be the most toxic. I've worked both of them, so far with no adverse effects. I've not worked any of the non-Australian "lacewoods."

Re: Lacewood?

#10

Re: Lacewood? *LINK*

Jerry Nicholson

Here is a link to the lumber company's exotic (?) hardwoods page. I do know the stuff is pretty heavy and quite hard. I get some planing tear out even with a 62 degree angle but that could be my fault, ie technique or blade condition. The surface planer flattens it easily enough but I may try to find someone with a drum sand to eliminate the tear out. The tear out is not deep but it is noticeable.

Jerry


Lacewood Description