Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

house generator revisited(OT)

Posts

house generator revisited(OT)

#1

house generator revisited(OT)

Larry in nw ohio

Awhile back I inquired about a house generator, thanks for all who commented. I looked at alot of them and almost went blind looking at web sites, but I finally found what I think is the best for us. I found one just a mile from us, they are a fairly good size electrical dealer contractor and I know a few of the people that work there. I bought the Milbank 20 KW 4 year parts and labor warrenty. They had one there like what I`m getting, it belongs to a friend of mine, his wifes brother was my best man. Well any how It`s going to be just less than $6000 totally installed. Best price I found I didn`t really need the 20 but it was only around 200 more than the 17 and I mostly over do things. Thanks again for the help Larry

Re: house generator revisited(OT)

#2

Re: house generator revisited(OT)

Bill124

Larry,

How do you like the Milbank? Being quoted 8,600 in NY on Long Island for 20KW hooked up to natural gas. Electrician likes Milbank though I was thinking of Cummins RS 20A.

Thanks,

Bill

Re: house generator revisited(OT)

#3

Re: house generator revisited(OT)

larry in nw ohio

Bill I don`t know what to really tell you as of yet. I`ll tell you what I do know, the salesman handles both the Mil and the Generac and he preferes the Mil because it has a 4 year warenty, parts and labor and their people that work on them like them because they say they are easier to work on. I have had it something over 6 weeks now and it kicked on twice, the first time it ran for about an hour without so much a hicup. But about a week ago it turned on and ran a few minutes and studdered and shut off and a few minutes later started up again ran a few minutes and just shut off. Well to shorten this the plummer put in a to small of a NG line, also the gas company was suppose to put in a high pressure meter also, so it`s not the fault of the generator. But the plummer is kind of a young, and new person. When we talked he said that he would get all the parts together and come and put them in at No Cost to me. So when this happens I expect the generator should work great. The first thing I`m going to do is turn the power off and run the generator for an hour or so with the other gas usering things and make sure it works OK. I think I would look for the best warrenty you can find since they do not get used very much. What kind of warrenty does the Cummins have? Good Luck with what ever you get. Larry

Re: house generator revisited(OT)

#4

Jim DeLaney, Austintown, Ohio

Re: house generator revisited(OT)

Jim DeLaney, Austintown, Ohio

Larry,

I have the Generac, and like it a lot. It's only run 'in anger' ;) about three times in the past six montha, but it's programmed to start and run - without load - for 12 minutes every Saturday morning, to ensure that its systems are okay, and its battery is fully charged. It's kinda comforting to hear it cycle up every Saturday morning.

Re: house generator revisited(OT)

#5

Re: house generator revisited(OT)

larry in nw ohio

Jim, Bill Well just like tools and most anything else, to find the best of anything is just luck of the draw, or maybe how lucky a person is to not get a lemon. I think with generators if you buy a brand name you`ll likely get a good one, as of yet I haven`t heard anything bad about any of them, of course I only just started looking at them. Even here at WC I didn`t get a bad report on any of them. Larry

Re: house generator revisited(OT)

#6

Jim DeLaney, Austintown, Ohio

Re: house generator revisited(OT)

Jim DeLaney, Austintown, Ohio

Larry, my Generac is a 12 kW, and it's plumbed in with a 1" gas line, straight off the meter. No meter change was necessary. I have oul heat in the house, but gas water heater, stove, and clothes dryer. Gas heat to the shop and garage.

Generator runs just fine, although I'm not sure it's run with both gas heaters and the stove on at the same time. I guess maybe the coming winter weather might tell me some more about that...

Re: house generator revisited(OT)

#7

Re: house generator revisited(OT)

larry in nw ohio

Jim Being that it`s a 12K with a 1" line it may be OK. One thing is the gas line straight steel oipe or corragated line. As with DC the smooth steel line will carry more gas than the corragated. With corragated being rough inside doesn`t let the gas flow as well. But being a 1" line and if it is right next to the meter or very close, you should be OK. Larry