Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Gremlins in my Shop

Posts

Gremlins in my Shop

#1

Gremlins in my Shop

Larry in nw ohio

My son and I makeing a mirror for his bathroom redo. So we put a shelf on the front with screws in from the back to hold it on, but first I put a little glue to hold it when I put the holes and the screws in so it would not move. So we put everything together. Then we take the shelf of so we can sand everthing. Then we turned the lights off for the evening and went to bed. Then today we went down to put everthing together for the ride home to Kansas City and got to putting the screws in the shelf and the shelf was off to one side by like a sixteenth of an inch. Thought it was on backwards but it could not be, only one way it can go on. I can not believe this How the He-- can this be. holes don`t move. Did this ever happen to anyone before, what happened? This scares me, do I have grimlins in the shop? Larry >( >(

Re: Gremlins in my Shop

#2

Bob

Re: Gremlins in my Shop

Bob

Scary. Could the wood have expanded?

Re: Gremlins in my Shop

#3

Re: Gremlins in my Shop

Larry in nw ohio

That`s the only explaination that makes any sense. Larry

Re: Gremlins in my Shop

#4

Ellis Walentine

Don't believe in gremlins

Ellis Walentine

There's usually a cause when an error occurs. I'm guessing that your dab of glue trick didn't work. Whenever I need to be sure that screw holes are in the right place, I clamp the pieces together and do all the drilling before taking off the clamp(s).

Can you plug the hole(s) and redrill?

Ellis

Re: Gremlins in my Shop

#5

Re: Don't believe in gremlins

Larry in nw ohio

What I thought of doing is to just move the holes over an inch or so, everything will be covered and not seen. Thanks for the idea. Larry

Re: Gremlins in my Shop

#6

Kneale Brownson

Re: Don't believe in gremlins

Kneale Brownson

Or you could shorten the shelf by 1/16 on the "long" end.

Re: Gremlins in my Shop

#7

Re: Gremlins in my Shop

William Duffield

Did you put the shelf in upside down on the second installation? (Or maybe upside down the first time and right side up the second time?)

Re: Gremlins in my Shop

#8

Re: Gremlins in my Shop

bud

I had a Gremlin in my garage for about 10 years. -- Made by American Motors Corporation

Re: Gremlins in my Shop

#9

Re: Gremlins in my Shop

larry in nw ohio

William There was only one way for it to go in. Thanks anyway. Larry