Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Redwood "Island" Tables

Posts

Redwood "Island" Tables

#1

Alan Young

Redwood "Island" Tables

Alan Young

Nearly a year ago I was approached by some clients to build bases for three slabs of Redwood they had obtained when they lived in the Pacific Northwest. The slabs are just under 2" thick. The long slab is a little over four feet long.





After some playing around with ideas for bases we settled on a "post on disk" concept.


The sketch shows the bases in a wood tone but the end design was to be a black base supporting the slabs.

I was into the project a bit before I started taking process photos. The posts were made by laminating 7 pieces of poplar, then turning them on my lathe..


The supporting disks or "plates" were also made from poplar. The disks received a routed ogee profile.


The bases received an initial coat of flat black. This was sanded back then a second coat was applied.



About this point in the process I had purchased and HVLP turbine and spray gun. Although the black was initially brushed on ,subsequent coats were sprayed including the top coat for both the bases and the Redwood Slabs. The top coat was a satin acrylic polyurethane.






Yesterday I delivered them to the owners who are happy to have them now as accent tables.








Thanks for looking.

-Alan

Re: Redwood "Island" Tables

#2

Re: Redwood "Island" Tables

Larry in nw ohio

Alan I wish I could do such a good job even on a that is already half done when I get the parts at home :D :D . Really great job with the bottoms and finish. Larry

Re: Redwood "Island" Tables

#3

Slabtastic Man!


Re: Redwood "Island" Tables

#4

Re: Redwood "Island" Tables

George Colonel's Workshop-Havertown PA

Good Morning Allan,

I like the end products very much. Good choice for the tables' supporting structure, and the black "makes" it all happen. And, the slabs are almost like Iowa beef: you can't have enough of it! Also agree with the finish, which should be durable on redwood. Beautiful job.

George

Re: Redwood "Island" Tables

#5

Ellis Walentine

Lookin' great, Alan

Ellis

Nice way to display those slabs, Alan, and the finish looks perfect.

Good work!

Ellis

Re: Redwood "Island" Tables

#6

Alan Young

Re: Lookin' great, Alan

Alan Young

Thanks Boss-The road to the Finish Line has been long and winding!

Re: Redwood "Island" Tables

#7

Thanks for the PICs

Bill Tindall

That was a clever use of the slabs, and attractive.

Re: Redwood "Island" Tables

#8

Ellis Walentine

One question

Ellis

I'm wondering what kind of engineering went into the attachment scheme of the pedestals to the slabs, particularly the smaller slabs that have only one pedestal? I've been accused of over-engineering furniture, but I always like to build in a safety factor -- call it the Aunt Tillie factor. If your customer's 250-lb. Aunt Tillie decides to sit on one of these tables, or heaven forbid, if Uncle Festus stumbles into one of them, will your bolt arrangement be adequate to resist this much levering force? All I'm saying is that there is a continuum of design solutions to deal with these and other unforseen factors, and they should be part of your design/engineering process. To the extent that you can add insurance without having it be too obvious, it's usually good to err on the safe side.

Ellis

Re: Redwood "Island" Tables

#9

Alan Young

Umm-yeah...Crossing my fingers.

Alan Young

I gave this arrangement a fair amount of thought-(maybe not enough ?) No pictures of the mount but I have mirrored the smaller disk(s) at the bottom of each pedestal.


with a ~7" disk at the top of each pillar/column. That disk is glued and screwed to the pillar. and is glued and screwed to each slab.


Four or more screws and glue fix the disk to the post. A pair of screws (in the other direction) and glue fix the disk to the slab.


The slabs have been drying for at least 7 years-at least that's when the clients obtained them so I think they have reached a pretty level moisture content. The poplar disk is about 7.5 inches in diameter. I haven't calculated the expansion/contraction differential between the poplar and the redwood. There may be some wood movement that my assembly protocol doesn't control- As far as Uncle Festus- sitting on the tables-They may tip over but I don't think the slabs will separate from the bases. I'd be interested in other engineering options that might have been employed-given that the client really likes the post/pillar on disk look.

A finale note: These drawings I posted leave the impression (to me at least) that the upper disk that is glued/screwed to the slab is quite small compared to the slabs surface area. I can only say when you view each table from the underside there is little worry that the disk is broad enough to support the overall area of the slab. Perhaps I'll try to sneak back over there just to document this...

-Alan