We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
Those old DeWalts have a bulletproof registration system with a tapered locking bar that keeps the arm dead-on at 90º. $700 is a fine price. They sell refurbished models for $3K or more, though I have not shopped them lately.
Does nobody here see my post as a red flag for help? I need an intervention!! Hopefully, if I do decide to go for it, my wife will do the right thing and throw cold water in my face.
Just about every pattern shop I worked in had one of those. its a good saw and can be trued up and adjusted in just about any direction. for cutting at 90 it is hard to beat. if you do a lot of cutting at an angle then a monarch unipoint would suit you better.
I have the 10" version of that saw stashed away in bits and pieces for if I ever get a bigger shop.
Check out the bearings in the arm to see if they are smooth. See if there is excessive wear in the ways in the arm. Check the bearings to see if they are smooth. Not much else to look for. I have a smaller version, a 14" GA with 3hp and it has served me well. I don't think my electric service in the barn would hold up for a 5hp motor.
Thanks....I'll check them. I know the guy selling it and he just started it up this morning. He states that the start was quick and smooth and the blade spun for minutes after the shut down. I like the sound of that but will confirm in person.
I would have thought 2-300. But it is whatever the local market dictates, which is rarely cheaper where I live. Around here you can't give old saws away, and the bigger they are the more that is true. All the small shops are closing down.
Take a dial and test indicator and indicate the arbour in several axis. You can also feel for the play, which is pretty accurate in certain situations.
I have benefitted this year from shop closures and downsizing. It is nice to get great tools for a bargain but I do so with respect for the sellers. It is not easy for them. If the deal is good enough I won't twist their arm any further....they have suffered enough.
Better for the tools to go to appreciative woodworkers than to scrap metal salvagers I guess.
I see these not often but several times a year. They are priced about what Tom posted. I don't have use for the DeWalt honker but I'm interested in how the 90 degrees is "locked in".
will cut off 30", which is nice. I wouldn't want one with less than 24" capacity.
I have used one of these before, and unless something is broken, you should't have anything to worry about. I only gave $400 for mine, which is 3 phase.
The only downside that I can think of, is to really be their best, they need to be against a wall, with at least 12' off each end in the clear, or 24' dedicated to it.
Then make a long table, with a fence that you can make a lockdown stop with an index for the ruler. Then NEVER move it off 90º.
It is easier to make those odd angle cuts another way, than running this top.
Also, don't ever put a blade on there with more than 5º hook. But I'm sure you already knew that.
There is a steel ring at the top of the column with tapered slots machined at multiples of 90 and 45 degrees, and a tapered bar that pivots into whichever slot you want to provide a positive detent precisely at that setting.
I would have gladly spent $700 in the old days for this saw, especially since it's single phase, but noweadays you might find the same saw for less. It better be local, though, 'cause shipping would be a major issue.
The plant I worked in had one in the maintenance shop - it was probably 25 years old when I started. It was dead accurate, even though it was abused and misused often. It was still perfect when I left almost 40 years later - think they may have replaced the start switch, a half dozen tops and 10 or 20 blades during that time!