Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

cable drive chuck

Posts

cable drive chuck

#1

cable drive chuck

Joseph Mulherin, Sr.

I am seeking to purchase a cable drive chuck which will use to hold my sanders for smoothing out my chairs. Does anyone know what it is called and where I could purchase one? TIA

Re: cable drive chuck

#2

Re: cable drive chuck

John Luke

Google is your friend.

Just search for flex shaft tools.

Re: cable drive chuck

#3

Re: cable drive chuck

Larry in nw ohio

Joe If I understand what you want, Sears has a couple different type that fit on the ends of the small hand held router like the dremel. Matter of fact Dremel may be where to look. Good Luck. Larry

Re: cable drive chuck

#4

Re: cable drive chuck

Joseph Mulherin, Sr.

Thank you, guys

Re: cable drive chuck

#5

Plan to spend a little more

Bill Houghton, Sebastopol, CA

My dad purchased a couple of the cheapest flex shafts he could find - designed to mount on a regular drill - years ago. The shaft tended to "wind up" in use, turning into a pretzel. When you look at the choices, be prepared to go upmarket a bit; avoid his experience.

Re: cable drive chuck

#6

Re: Plan to spend a little more

Joseph Mulherin, Sr.

Yes, Bill, I understand that can happen. I want the flex cable to run inside a housing to prevent the corkscrewing. Want to attach it to my Shopsmith on the drive shaft, then install various round spindle sanders I have in the chuck so I can smooth the gentle curves on the chairs where the legs meet the seat and smooth out the rockers to a nice looking curvatures.

Am going to go to Sears and see what they have, and also look at the Dremel.

Re: cable drive chuck

#7

Re: Plan to spend a little more

Larry in nw ohio

Joe Sears may also have Dremel. Larry

Re: cable drive chuck

#8

Re: cable drive chuck

Tom Dunlap

Maybe these?

http://www.thefabricator.com/article/cs-unitec-inc/flexible-shaft-grinder-designed-for-awkward-pieces-hard-to-reach-areas

http://www1.mscdirect.com/eCommerce/NavigationServlet/Power-Tools/Grinders-Sanders-Finishing-Tools/Grinders/Flexible-Shaft-Grinders-Accessories/Flexible-Shaft-Grinder-Accessories/_/N-77f0r?refinement=4290194438&searchandizedOk=Y

Re: cable drive chuck

#9

Rick L

Re: Air Cushioned Sander

Rick L

http://www.industrialabrasives.com/sanding-drums-airfilled-cushion-contour-sanders-c-76_204.html

You should look into the air cushioned sander to get nice countour profile sanding. They used to be expensive and are common in industrial shops but now the home shop can afford them.