Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Cabinet doors rattle please help!

Posts

Cabinet doors rattle please help!

#1

Cabinet doors rattle please help!

vinny

Hey everyone, I am a new homeowner as of yesterday! This was the happiest yet most expensive day of my life lol. I was in the process of looking at some things that need some work in the house and the cabinets that are there seem to have one minor annoyance. When you close the cabinet doors you can hear the center panel insert rattles, even closing the door as softly as possible. While the cabinets still look great this is becoming a issue I would really like to resolve. I don't have the money right now to replace them and they are only 5 years old. I am definitely not the most handy person where I can take them apart or anything like that but I can handle basic DYI solutions. Im not sure the type of wood they are made of, I know my dad has solid oak and they don't have the same hefty feeling so I am guessing they are not solid oak. Does anyone know any decent solutions that could stop this that someone such as myself can perform? Any help is super appreciated, thanks all!

Re: Cabinet doors rattle please help!

#2

Re: Cabinet doors rattle please help!

Carol

Just so we have our terminology straight, let me identify some parts of the door so we are all talking about the same thing. Excuse me if you already know this stuff. The panel is the center of the door. The vertical side pieces are called stiles. The horizontal top and bottom pieces are called rails.

The panel fits into the stiles and rails usually about a 1/4". To quiet the rattle, pin the top and bottom of the panel in the center edge of the rails from the back side of the doors. All this work is from the back side of the doors. Several ways to pin it. A well equipped shop would use a pin nailer. If you have an air compressor you might get one at Harbor Freight, but it is a tool not often used even by the most ardent woodworker.

Another approach would be to get some brass #4 screws about 5/8" long and drill a pilot hole into the rail about 3/16" in from the panel. Drill a little ways into the panel. Then carefully drive the screw straight in. If they are real brass screws, drive a real steel screw in first. Back it out and replace with the brass screw. Brass is too soft to make its own path well. I would use a flathead screw with a Phillips head drive. Slotted screws are a disaster in the making in my shop. You will have to slightly countersink the hole. Simply use a countersink bit. A small single flute will work the cleanest. You can get this at real tool store. This would leave a tidy repair you should be able to live with.

Another approach would be to find the nearest woodworking club in your area and go make some friends to show you the ropes. If there is a Rockler or Woodcraft store, you will have a place to start. Also tell us where you are and maybe we can direct you better.

Hope that helps some.

Re: Cabinet doors rattle please help!

#3

Re: Cabinet doors rattle please help!

Jason Waters

Excellent advice from Carol.

If you want to stop the rattle temporarily until you have time to do it right if you are busy with other things, take an empty 12 pack box, and cut some cardboard shims to shim between the panel of the door and the rail/stiles. I'd cut them long, so you can pull them out, as this is a temporary solution. You may have to fold them over, if the door panel has a lot of slop. You could also slip in pieces of thin foam too. Many options.

Pinning would be the best in my opinion, but takes more tools than you may have access too at the moment.

Congrats on your house purchase, it's great to be in a home.

Jason

Re: Cabinet doors rattle please help!

#4

Re: Cabinet doors rattle please help!

Keith Newton

I would lean more toward using a caulk, instead of fasteners. I would start by cutting the tip, at an angle with a fine little hole. You should be able to get a little between the loose parts, which would make a flexible little shim, if you allow it to dry before moving it around much.

The panel is normally left loose, so it can expand and contract with changing humidity, so you don't want to do anything to trap the side edges, or it will cause the panel to split when it tries to contract. So whatever you do, start out doing the minimum, like fastening the middle of the top and bottom.

Other options, is to make sure there are some of the little door bump pads on the back of the swing side, so it isn't just wood slamming against wood.

If these are concealed Euro hinges, they can be replaced with soft-close hinges, and for some, this can be an add-on which just snaps on top of the existing hinge.

Re: Cabinet doors rattle please help!

#5

Agree

Bill Tindall

I would just head on over to Lowes or HD and get a caulk gun and a tube of silicone caulk of some color that blended OK with the wood. Put a small dab of silicone top center and bottom center and see if that cured the problem. The function of the silicone is to become a flexible nail. A little dab will do you. If it still rattles add two more dollops centered right and left. The silicone will be flexible enough to let the panel expand and contract as it wishes.

Re: Cabinet doors rattle please help!

#6

If you are new to this

Gary Smyth

you might want to do whatever you choose on the inside of the cabinet. That way any smears or other mistakes will not be seen. Once you "get the knack" you can take advantage of what you learned to do any corrections.

Re: Cabinet doors rattle please help!

#7

Re: Cabinet doors rattle please help!

Pete in Holland

Take one or two lengths of yarn and on the inside face of the cabinet, jam it down between the frame and panel with a thin flexible blade.

It will compress and take care of the rattle.

Re: Cabinet doors rattle please help!

#8

Re: Agree

Keith Newton

Bill, Thanks for reinforcing my suggestion. I started to suggest silicone, except for the fact that it makes it hard to ever come back and get a good finish, if someone ever wants to re-finish the cabinets.

vinny didn't tell us if the doors were stained or painted, to help us make the best choice. If they are painted white or something, I would get a siliconeized paintable caulk. I think the properties would be plenty good for this, and not a problem down the road of time.

As for the outer edges or corners. I think you may be able to fix any leftover problems with flat tooth-picks. Put a little glue on one side, see if you can jamb it into the back space, then lever it over, and break it off, or stab through it with a sharp chisel.

Re: Cabinet doors rattle please help!

#9

Re: Cabinet doors rattle please help!

Keith Newton

Dang Pete, You are making us look bad with that suggestion. Couldn't you suggest a place where vinny could find some okum or something, then we could make it water tight.

I like simple. I think you win.,,,,,,,,,,,,,,,,,,, unless there is a box of toothpicks already in the cabinet. ha

Re: Cabinet doors rattle please help!

#10

You have all been extremely helpful!

Vinny

Thank you all so much for the fast and extremely helpful responses. I mean literally everyone of your choices was great and sounds like it has the potential to fix this darn problem. Appreciate the time you all took in answering. Sorry if I was light on details….I am going to be at the house this weekend still in the process of moving, the cabinets are stained not painted…and to my knowledge if i remember for some reason i don't think there was a big enough gap to even caulk but i could be wrong. i am going to take pictures this saturday and post them here for your opinions. The calk and yarn seem like the easiest to try out first which ill probably due first, but all suggestions where great and super appreciated. The one thing i may add that may help that i noticed was that when i closed to cabinet even to the lightest touch it rattled and if you take your finger and lightly poke at the center panel in the middle it sounds like it makes the whole front cabinet panel rattle its odd and i did not notice any major gabs. I am going to measure all the inlay sizes for new hinges I'm going to pick up some blum soft close hinges on amazon and see if those help out as well. Any more suggestions would be awesome and ill get those pictures posted ASAP thank you all so much!

Re: Cabinet doors rattle please help!

#11

Re: Cabinet doors rattle please help!

larry in nw ohio

Vinny You have a lot of great suggestions. If I may I`d like to suggest something in going with the putting something like a cereal box cardboard in between the panel in the bottom and top rail in the back. Take a putty knife and push it in between the rail and panel to make the space bigger so as to push the cardboard into it easier. Then pull the putty knife out leaving the cardboard. As good of a suggestion the caulk is, myself I wouldn`t use it, because being the slob I am i`d have the caulk all over except in the crack. Good Luck with whatever you do. Larry

Re: Cabinet doors rattle please help!

#12

Once a teacher ...

Mike Farinella

always a teacher! Nice work Carol.

Re: Cabinet doors rattle please help!

#13

Re: Cabinet doors rattle please help!

Jim Hager

A cheap, easy and effective trick is to take flat tooth picks, dip the end in glue and force it in between the panel and the rails or styles, then break off the excess.

Re: Cabinet doors rattle please help!

#14

Before you order those hinges,

Keith Newton

Just be warned that choosing the right hinges is a pretty daunting task the first few times around. I would suggest that you wait until you have shared those photos.

If you already have Euro hinges, just adding the brake on the back of the hinge would be the easiest / cheapest way to go. But they only work on the straight arm hinges, but not on the mid or full cranked ones.

Re: Cabinet doors rattle please help!

#15

Re: Before you order those hinges,

Vinny

Thank you for the words of advice! I'm going to the house on Saturday and I will be taking pictures and measuring overlay sizes, as soon as I put them on my computer that day im going to post pictures of what I already have and what I intended to buy.... I really appreciate all the help everyone is providing it means alot thank you so much.

Re: Cabinet doors rattle please help!

#16

Re: Before you order those hinges,

Vinny

Thank you for the words of advice! I'm going to the house on Saturday and I will be taking pictures and measuring overlay sizes, as soon as I put them on my computer that day im going to post pictures of what I already have and what I intended to buy.... I really appreciate all the help everyone is providing it means alot thank you so much.

Re: Cabinet doors rattle please help!

#17

PICTURE OF EXISTING HINGE

vinny

Hey all i forgot i had a single picture of the existing hinge thats on the cabinet....I did not yet get a chance to measure the inlay size, but I'm trying to figure out as i mentioned i am thinking of getting the blum soft close hinges. As keith mentioned it could possibly be cheaper to buying the brakes to add to the back but the hinges themselves seem to be shot, so i figured since they need to be replaced why not get the two in one. So anyway this is the hinge that i have and an example of the hinge i was thinking of getting after figuring out the size I need. The one thing that concerns me is the indention of the whole in the door that the hinge sits in, how do i know the exact shape and size will fit when i get new ones like the blum hinges? sorry about so many questions guys this is totally new for me. the bottom link is the ones I'm thinking of purchasing. thank you!

http://www.flickr.com/photos/80006555@N05/7349888896/in/photostream

http://www.flickr.com/photos/80006555@N05/7164677375/in/photostream

Re: Cabinet doors rattle please help!

#18

Re: PICTURE OF EXISTING HINGE

Keith Newton

Vinny, I'm sorry to say, I have never use those hinges for face-frame. I changed over and started using the 32mm system in the early eighties, where the hinge mounting plate screws into the same line of holes used for the shelf pins, and screw in the drawer slides.

There does appear to be something inside the cup, which may be soft-close, but those look a bit cheesy compared to the ones made for the system.

I would suggest that you only order a few to begin with, because there probably is still some variation for the amount of overlay, even in that type of hinge.

I wouldn't worry about the cup hole in the door. 35mm is the industry standard, except a few brands. Good luck.

Re: Cabinet doors rattle please help!

#19

Re: PICTURE OF EXISTING HINGE

Vinny

Keith the picture with the two hinges are Blum soft close hinges from what I heard there supposedly one of the best brands u can get especially soft close wise. Do you have a picture or brand or model of the better ones u said were out there by any chance?

Re: Cabinet doors rattle please help!

#20

Re: PICTURE OF EXISTING HINGE

Keith Newton

Your cabinets are face-frame, so the others will not work for you.

You are right, Blum is a great brand, and the one I use most.

Re: Cabinet doors rattle please help!

#21

Kneale Brownson

Re: Agree--But use Clear silicone.


Re: Cabinet doors rattle please help!

#22

Re: Before you order those hinges,

allen in wisconsin

I usually just shove a toothpick between the panel and a rail or stile on the top and sides, then snap it off....no one can see it.