Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

"Shop" Safety?

Posts

"Shop" Safety?

#1

"Shop" Safety?

Mark Mandell - Gone Round In New Jersey

I have formed a habit of wearing my watch that has a metal (stainless) band while I work in the shop.

I also have a condition known as Thoracic Outlet Syndrome that has symptoms including numbness and itching at the wrist and elbow in one arm or the other.

So I happen to look at my watch band today, and find a build-up of dust and fibers between the links and under the catch. I thus soak the watch band in a detergent solution and blast it out with high-pressure air. I put the watch on the nightstand.

Result?

I haven't worn the watch in 12 hours, but the itching on my left arm (wrist and elbow) has stopped.

REPEAT: The itching has S-T-O-P-P-E-D.

Memo to Self and WC Members:

"Wood dust can be an issue. Let's be careful in there."

Re: "Shop" Safety?

#2

Re: "Shop" Safety?

Bill Houghton, Sebastopol, CA

If you're a power tool user, I'm not sure wearing a watch in the shop is a good idea anyhow - all it needs is one catch to ruin the watch and possibly your entire day, as your hand/wrist get pulled into the machine in use.

Re: "Shop" Safety?

#3

No watches, no jewelry, no long sleeves.

roger lance

Do you know what species of wood you were dealing with??....and if you are breathing it in, you are probably having internal reactions as well.

Re: "Shop" Safety?

#4

Could be a stainless steel allergy???   


Re: "Shop" Safety?

#5

Re: "Shop" Safety?

Mark Hennebury

I break almost all of the " shop safety rules" never have used a blade guard on any table saw or jointer, and I have table saws with 7.5 hp motors and 18" blades fully exposed, i have had 24" jointers with no blade guards, I sharpen jointer blades with a hand held water stone while the machine is running, but i never work with a watch or jewelry on and always roll up my sleeves, and I can still count to ten after 40 years in the shop.

Dust should be your least concern.

Re: "Shop" Safety?

#6

Clarification

Mark Mandell - Gone Round In New Jersey

I take the watch off when using stationary power tools [TS, BS, Jtr, Lathe] but often had it on the rest of the time. I don't work exotics, although I've been doing a lot of walnut lately which can be a sensitizer under the right conditions; I'm betting that packing your watchband with walnut dust held against your wrist will qualify.

I use serious dust collection plus ambient air cleaners, and my shop is vacuumed using the DC at the end of each session.

This was not a one-time occurrence. I've had the itching for months, but was told it was a symptom of the TOS and would resolve as the condition subsided.

The point of my post was to "sensitize" WCers to a rather arcane risk that I, and perhaps others here, never thought about.

Peace

Re: "Shop" Safety?

#7

Allergic to.....

Thomas Skaggs, Foothills of Mount Level

.....the passing of time?? Watches remind us of the passing of time. Maybe you are allergic to that? I am. The allergy symptoms I have are the gaining of weight, the greying of hair and sometimes the sudden need for a nap. I confess however that an itchy wrist is an odd syptom for that particular allergy.

Re: "Shop" Safety?

#8

Bit different for me...

John in NM

I'm allergic to deadlines :D

Re: "Shop" Safety?

#9

Allergy to nickel?


Re: "Shop" Safety?

#10

Jesper, Denmark

Re: Shop rule #1.....

Jesper, Denmark

No jewellery, watches, rings or any other item that might get caught in machinery to be worn in the shop at any time.

No 1A is that when the first beer gets opened, the power to machinery goes off - maybe no physically, but at least mentally.

Shop time is fun. Drinking beer with friends too, but never the twain shall mix.