Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

An Anchor for my Chief

Posts

An Anchor for my Chief

#1

Michael Donaldson

An Anchor for my Chief

Michael Donaldson

So, my Chief recently retired after 20 years of service in the Coast Guard, and I was commissioned by our department to make him his retirement gift. I decided to make a Chief's anchor. In order to make it realistic, I set my mind to carve a chain. At first, I made a plus sign out of a six foot long piece of basswood, with the intent of carving one continuous chain


After a very short while, I realized I didn't have time for this method, so I instead made it from Cherry, starting like this


cutting each link out on the bandsaw, then starting the centers on the drill press.


Once this was done, I used my Mitre box to cut each link in half with a backsaw.


When I had enough links, my 3 year old, Tave, and I snapped every other link in half and then re-glued it into a chain.


Then I had glued the chain to the rest of the anchor using string and rubber bands to hold it in place while the glue set.

The anchor is made from Cherry, Purpleheart, and Curly Maple. I finished it with 8 coats of 1# clear shellac. And here is the finished product:


It was very well received. By the way, the lettering was done by wood burning, a new medium for me that I have found very useful.

Re: An Anchor for my Chief

#3

Dale Lenz

Re: An Anchor for my Chief

Dale Lenz

I like the way you figured thing out, Mike. Good job!

Re: An Anchor for my Chief

#4

Nicely done Sir!