Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Major Tool Review

Posts

Major Tool Review

#1

Major Tool Review

Thomas Skaggs, Foothills of Mount Level

....well....not so major....it's just a glue brush actually. Ok, so now they have these silicone brushes for applying glue. They are similar to the silicone basting brushes you can now find in the kitchen gadget stores. I bought one for $5 +/1 at a woodworking chain store (begins with an R).

The brush is about an inch wide so it is not good for small area applications. But it is pretty good for larger apllications and holds a fair amount of glue with each dip. The best part is that if glue dries on it then all you do is pick the dry glue off. It does not stick. The brush cleans up easily.

Maybe it doesn't measure up to sliced bread but I must say that for $5 it's worth a purchase to try and see what you think.

T.

Re: Major Tool Review

#2

Re: Major Tool Review

Keith Newton

What type of joints do you use it on, edge joints, or MT, dovetails?

Re: Major Tool Review

#3

Re: Major Tool Review

Robin Corell in Atascadero CA

I might have to pick one up. Are the ones sold at kitchen stores the same? I wonder how they would work for hot hide glue. Sometimes I forget to pop the brush in the glue pot and it can take an hour or more for a really dried brush to soften up. It would be nice to be able to pop the glue off the brush and throw it in the pot and and then be able to use the clean brush right away.

Robin

Re: Major Tool Review

#4

Picture of the beast

Thomas Skaggs, Foothills of Mount Level

A picture is worth a 1,000 words


I have used it for verious applications. Yesterday I used it for veneering.

BTW....It was only $4. As said, it's too large for small or tight places but generally a helpful tool. Also...note the little spreader on the tail end.

Re: Major Tool Review

#5

Conventional alternative.

Bill Tindall

1. The metal handled things called "acid brushes". I toss them in the dishwasher after use and they come out dandy.

2. For large areas I have a short bristled paint brush. After use I sozzle it in water to remove much of the glue and into the dishwasher.

I would have a concern. Silicone rubbers leach tiny amounts of silicone. Probably not a significant problem in this application but then I am paranoid about the ill effects of tiny amounts of silicone on surfaces.

Re: Major Tool Review

#6

David Barnett

(Message Deleted by Poster)


Re: Major Tool Review

#7

Our baster

Thomas Skaggs, Foothills of Mount Level

We have a silicone baster. After I bought the glue brush I remembered our baster. The biggest difference between the two is the length of bristles. The baster's bristles are longer and might be too "floppy" for some glue applications. The obvious easy fix...cut them shorter.

I have used Titebond II and Titebond III as well as cold press veneer glue and none of them stuck to the brush when dried. I have observed no bonding problems so far.

Re: Major Tool Review

#8

aside : "Frequently Bought Together"

Yonak

Amazon's "Frequently Bought Together" feature cracks me up sometimes. The other day I was looking for square drive inserts. I found some and guess what Amazon suggested I buy with them .. a box of Phillips head screws.

Re: Major Tool Review

#9

Re: aside : "Frequently Bought Together"

Thomas Skaggs, Foothills of Mount Level

I guess to a computer program a screw is a screw. ;-)

Re: Major Tool Review

#10

Acid Brushes $1.99 for 36 quantity HF


Re: Major Tool Review

#11

Thanks

Bill Houghton, Sebastopol, CA

Like others, I've been using acid brushes.

Somewhere, I read a tip about expired credit cards as glue spreaders. I'm reluctant to leave even expired credit cards around, but we keep getting junk mail with fake cards in it, and they work quite well.

Re: Major Tool Review

#12

Spreaders

Mark Mandell - Gone Round In New Jersey

I pitch the fake cards as I still have a collection of Handyman's Club pasta gauges which do great although I don't use the 4 very rare black ones which are, naturally, kept in the safe.

Re: Major Tool Review

#13

Re: Thanks

Stuart Johnson

Most motels and hotels pitch the key cards so I just ask if I can keep it. At one the clerk asked why I wanted it and then handed me a dozen when I told her it was for spreading glue.

Re: Major Tool Review

#14

I would still like to hear how you use it.

Keith Newton

Do you pour some glue into a dish, squeeze it onto the brush, onto the wood, then brush it out?

Re: Major Tool Review

#15

Re: Thanks

Bruce, a MN Galoot

We have a bunch of card blanks at work that are no longer valid, contain no info that can be read on anything else than our proprietary system. They're wonderful for glue spreaders.

Re: Major Tool Review

#16

credit card glue spreaders modified

Bill Tindall

David Finck (the plane book person) showed me an modification that works well for spreading on veneer. He filed tiny notches in the edge with a tiny triangular file like one would find a an adhesive spreader. It is a bit tedious filing the closely spaced notches so these get reused. They are easy to wash off after use.

Re: Major Tool Review

#17

I did that with a plastic putty knife