We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
well I have one more inspection to go before I can move into the shop. The electrical inspection was last night and I passed with flying colors even with two 220 outlets in the floor. I will start moving the tools into it next week a little at a time. I figure I will do all the DC plumbing along with the air / air filter and heater and AC.
in the bottom of each box. I have a 5 foot 5 inch space under the shop I store all my lawn equipment in so If the dust gets in there it will fall to the floor under the shop. The cover is a standard cover and if I have my TS plugged in all the time the dust should not be a problem. If I start to see a lot of sawdust on the storage floor I will look at caulking around the edge of the cover and plug. Time will tell.
Paul - you can search floor boxes and see a lot of different choices. For some 220 V applications, you can get a box cover that will effectively "seal" around the receptacle edge. If you have a reasonable plug - say a twist lock - you really don't have to worry about dust flowing into the blades of the receptacle.
It might be advisable to get a box cover that has a cover screw center so that the receptacle can be sealed off for certain applications.
The company I used to work for had floor outlets as well as drop outlets in various parts of various plants.
I am not sure of a get together at my place. I am still in the middle of a dozen other projects I started a few years ago while I was traveling so much, but one never knows.