Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Which Hammer should I get?

Posts

Re: Which Hammer should I get?

#26

My last one was the Husky 22

Keith Newton

With the straight claw, waffle face, and magnetic nail holder on top. It has a hickory handle, and I like it as well as any I have ever owned over 40 years as a professional. I can still "one stroke 16's" all day long, if I'm in position.

Back in my early years when I did a lot of framing, I used a roofing hatchet with a leather wrist strap. I'd give the handle a twirl, twisting 360 to tighten the strap, which then only required a really light finger grip. With a good swing, and final whip of the wrist, I could slap those nails in one stroke with ease. After that, pulling a small handful of nails out and turning the heads all the same way speeds the feed up.

But to get really fast required good foot-work. It would blow my helper's minds when we laid all the parts down for a wall section, and I would give them the gun on the foot end, and I would take the top which required a lot more nails for header and top plate, yet I could finish ahead of them, when I felt like showing out.

You need a different lighter weight hammer for drywall. Seems like Habitat would provide a collated screw gun for the drywall. I was told by the last finisher that I used, that the best crews now use liquid nails for the walls, and only screw in the bevel area and edges, where they will be covered by the joint bedding, so there aren't any heads to float out in the middle. Saves time, and better job.

Re: Which Hammer should I get?

#27

Re: Which Hammer should I get?

Justin Szeliga

Get a Vaughn 32 oz w/ a waffle head & you'll miss a nail & catch your thumb or just blowout your elbow. Either pain will cover the Carpal Tunnel discomfort completely.

I still have my old Vaughn & use it to tear wetbeds apart in old bathrooms. When I framed with it a long weekend would always end with a throbbing elbow, which was gone by coffeebreak on the first day back.

I now use a Hart framer with an axe handle when I do heavy work, 16oz trim the rest (most) of the time. Better control, less wear & tear.