Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

WIP-Redwood Slab "Island" Tables

Posts

WIP-Redwood Slab "Island" Tables

#1

Alan Young

WIP-Redwood Slab "Island" Tables

Alan Young

I am working on an interesting project. A client obtained three slabs of Redwood and wanted them for accent tables.


We settled on a base design of a cylinder on plates. The bases are made from Poplar and will be black.







The pillars are 5" in diameter- they were glued up from 7 pieces of 3/4" poplar then turned on the lathe. I will lag bolt the circular pieces to the pillars then glue and screw the circular pieces to the underside of the slabs and the bases.

Haven't decided on a finish for the slabs yet. Thinking about the Epoxy finish.

-Alan

Re: WIP-Redwood Slab "Island" Tables

#2

Re: WIP-Redwood Slab "Island" Tables

Larry in nw ohio

Really looks like a very interesting job, Alan. Would you know where a person could find slabs like those,but I would like oak or walnut. Great Job. Larry

Re: WIP-Redwood Slab "Island" Tables

#3

question

Bill Tindall

Thanks for sharing. It is a pleasure to open WC and find pictures of nice stuff.

How was the molding on the base done?

Re: WIP-Redwood Slab "Island" Tables

#4

Ellis Walentine

You've been busy!

Ellis Walentine

Very interesting design, Alan. I'd like to see them in their final setting. The finishes will really make these come alive.

Nice work.

Ellis

Re: WIP-Redwood Slab "Island" Tables

#5

Alan Young

Re: question

Alan Young

Hi Bill,

I should have taken more progress shots- but these drawings will have to suffice. The edge treatment is just a router bit- a classic ogee profile- run around the edges.

I started by creating the circles and the ovals- or quasi ovals- out of 3/4inch poplar


Then ran the router around the edges.


Final assembly has has all parts stacked in order.. as this is solid poplar-not MDF or man made materials, this drawing doesn't maintain proper grain orientation but I am working to keep the the grain running parallel in all pieces -including the laminated turned posts-


Re: WIP-Redwood Slab "Island" Tables

#6

Alan Young

Re: WIP-Redwood Slab "Island" Tables

Alan Young

Hi Larry,

The client is in the military and obtained the Redwood when he was stationed in the Pacific Northwest.--

Alan

Re: WIP-Redwood Slab "Island" Tables

#7

Alan Young

Ellis I've never done a live edge piece before

Alan Young

--do you have a leaning as to what type of finish highlights the shape an character of live edge pieces? I like the idea of epoxy to fill the surface but am concerned the gloss will take away from the personality of the Redwood...

-Alan

Re: WIP-Redwood Slab "Island" Tables

#8

Re: question

Yonak

Nice perspective in the drawings, Alan. Is this architectural software ?

Re: WIP-Redwood Slab "Island" Tables

#9

Alan Young

The renderings are from Sketchup -free from Google

Alan Young

A lot of flexibility in the program- I was able to import to view photos of each slab and then trace the out lines and give depth and color to the slabs.




Re: WIP-Redwood Slab "Island" Tables

#10

Ellis Walentine

You're right about the gloss

Ellis Walentine

I strongly advise against gloss anything on those natural edges, unless you plan to use matte for the final coat. How about spraying lacquer?

Ellis

Re: WIP-Redwood Slab "Island" Tables

#11

Re: You're right about the gloss

Dick Coers

Old redwood like that will drink finish like crazy, and will really darken fast too. I suggest you practice a little on the underside because a black base and deep red may really make these disappear in dark room. I'm more of a free form base kind of guy with tops like that, but just personal preference. Definitely no epoxy on the edges unless you like the look of those old cypress log section clocks

Re: WIP-Redwood Slab "Island" Tables

#12

Dale Lenz

Larry...

Dale Lenz

Print some of Alan pics and take around to some "mom & pops" sawmills, leave your phone number....you may get an overload of slabs.