Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Anybody know what this is?

Posts

Anybody know what this is?

#1

Anybody know what this is?

Henry Higginbotham

I'm pretty sure this one's not an army telephone or telegraph, and I'm also pretty sure the slick, heavy-duty toggle clamp is worth the two bucks I paid at a thrift store this afternoon, but beyond that I'm lost. The red stuff is some sort of cushioning foam. Looks like you'd clamp some round thing and then heat it up or measure its kilo-somethings (if you had the rest of it).


Re: Anybody know what this is?

#2

craigd

Re: Anybody know what this is?

craigd

It is used to change the oil filter on the Millennium Falcon.

Re: Anybody know what this is?

#3

No, no

Bill Houghton, Sebastopol, CA

Clamps the retro-turbo-encabulator for bench work. The cable is for the astral heat stabilizer, so you can test it "live."

Whatever it is, it's mystificating.

Re: Anybody know what this is?

#4

Re: Anybody know what this is? Nope..

Bob Entwisle in NJ

But it sure is a nice one!

Bob in NJ

Re: Anybody know what this is?

#5

Re: Anybody know what this is?

John Luke

Heavy duty blood pressure cuff?

Re: Anybody know what this is?

#6

MRI machine for Lab Rats.


Re: Anybody know what this is?

#7

Re: Anybody know what this is?

Dave Paine

Wow,for once I may get to provide an answer.

This is a hot press for mugs / coffee pots. My wife has a very similar one. Used with dye sublimation inks to transfer the ink from the paper to a film on the surface of the mug.

The toggle clamp is needed to provide sufficient force to clamp the paper evenly around the mug.

The cushion is to take up any space between steel collar and the mug.

The wire is for the heater which is a surface type heater.

Normally these would have a temperature gauge, at least my wife's does. The sublimation inks require a minimum temperature, e.g., 375 F.

Clamp the mug for a minute or so and then the ink and image is transferred to the mug.

If any interest I can post some pictures of my wife's unit and samples of the results.

In case you want to use this, the sublimation inks are VERY expensive, and require special ink jet printers.

Re: Anybody know what this is?

#8

Pic's of my mug press

Dave Paine

This is my wife's mug press.


This is how it looks with a mug in the closed position.


This is an example of the results. This is our young Dalmation male Ranger. Handsome fellow.


Once the mug has cooled the image is permanent. We put these in the dishwasher without and problems, other than if the mug cracks. :)

Re: Anybody know what this is?

#9

Way to go, Dave

Yonak

At this site, ask and you get an answer.

Re: Anybody know what this is?

#10

Re: Anybody know what this is?

JMOHNIKE

back in the 60's we used them to roll a big joint. The were real common back then, this is the first one I have seen in many years.

Re: Anybody know what this is?

#11

Re: Anybody know what this is?

Larry in nw ohio

JMO I thought I saw those somewhere, but I just couldn`t remember. Those were the good old days. Larry

Re: Anybody know what this is?

#12

Re: Anybody know what this is?

BrianA

I'm not posting a picture of my mug!

Brian

Re: Anybody know what this is?

#13

Re: Anybody know what this is?

JMOHNIKE

thank you

Re: Anybody know what this is?

#14

Thanks Dave. That makes sense . . .

Henry Higginbotham

Although I liked some of the other uses better. :)

Re: Anybody know what this is?

#15

Wow!

John in NM

I have to say, I am impressed that you knew what it was :D

Pretty amazing breadth of experience around here.