Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

You think the Ryobi Lawsuit would like this *LINK*

Posts

You think the Ryobi Lawsuit would like this *LINK*

#1

You think the Ryobi Lawsuit would like this *LINK*

John Lucas

I actually built something like this 35 years ago or so when I first started woodworking. Kind of scary now but really helped me cut some wood back in college.


http://www.youtube.com/watch?v=f92MIxp9jTM&feature=g-vrec&context=G2493f2aRVAAAAAAAABg

Re: You think the Ryobi Lawsuit would like this *LINK*

#2

Re: You think the Ryobi Lawsuit would like this

Jerry Gibbs

why is his left index finger bandaged?

Re: You think the Ryobi Lawsuit would like this *LINK*

#3

Dale Lenz

Re: You think the Ryobi Lawsuit would like this

Dale Lenz

>why is his left index finger bandaged<

Probably from a kick back when he pulls the board back towards him, between the saw and the rip fence. My reply was ....................well never mind.

Re: You think the Ryobi Lawsuit would like this *LINK*

#4

Re: You think the Ryobi Lawsuit would like this

larry in nw ohio

I`d be very careful in not letting out your address or the government safety police will find you. Larry

Re: You think the Ryobi Lawsuit would like this *LINK*

#5

Re: You think the Ryobi Lawsuit would like this

Jim Breeden

I'm surprised his fingers are still attached, instead of just bandaged. :b

Re: You think the Ryobi Lawsuit would like this *LINK*

#6

Re: You think the Ryobi Lawsuit would like this

larry in nw ohio

Well sometimes a person needs to improvise, as they say nessesity is the mother of invention. It is unsafe most of the times but it gets things done. Look what they do in the third countries and they can produce some very nice products. Larry

Re: You think the Ryobi Lawsuit would like this *LINK*

#7

Dangerous in several ways.

Keith Newton

First I would note that his hand position reveals that he is a novice with no experience at feeding stock through a real table saw, so even though he can do this neat video, he has no idea of the forces he is up against, nor the danger involved.

If Hejaz a kickback, which is only a matter of time. That little box, which didn't seem to be locked down will flipp off the back of the bench, and turn into monster contraption, with extremely good traction on soft floors, yet running in unpredictable circles, while he chases it, to unplug it, with his other unmangled hand.

Ventilation for a motor is always a good thing for motors, yet I guess I missed that trade off. But dust free is nice, until you fry the motor.

The fence made me smile at the memory of some of the old carpenters who showed up on jobs long ago, with vice-grip pliers to lock the fence of their Crapsman TS's. His fence was about as good as theirs. He he

I hope, if there are any beginners thinking about following this, that they will post, and ask advice, then heed any precautions.

Re: You think the Ryobi Lawsuit would like this *LINK*

#8

Re: You think the Ryobi Lawsuit would like this

Richard McComas

I worked commercial construction here in Alaska from 1972 to the mid 90's. It was not that unusual to see those table saw contraption on jobs sites. Used a few myself. Not that it didn't happen but I never saw nor heard of anyone getting hurt on one in all those years.

Re: You think the Ryobi Lawsuit would like this *LINK*

#9

Re: You think the Ryobi Lawsuit would like this

eliot d

The video really makes me cringe!

Re: You think the Ryobi Lawsuit would like this *LINK*

#10

Re: You think the Ryobi Lawsuit would like this

Jerry Nicholson

I built something very similar over 50 years ago, although much heavier and cruder. I didn't use a fence though! I am not sure it was much more dangerous than my dad's grossly misaligned 8 inch tilting table saw though. I was trying to cut rabbets in a plywood cabinet door with it and sent a 1/4 by 1/4 plywood arrow right through a layer of sheet rock on the wall. Didn't go through the other side. My 1964 model Craftsman 10 inch table saw is a lot safer but I cringe at some of the dumb things I did with it when I was 40 years younger.

Jerry