Re: Mitered plywood
eliot d
Well, I started gluing up these mitered plywood boxes; and all edges --except one -- are just about perfect. Unfortunately, the one edge, on these audio speaker cabinets, has a very small gap all along one vertical FRONT edge. What a bummer! I just can't have it this way. So here I am about to go with your router/ inlay approach. But even before I try it, I thought I would try simply to put a very slight round over along that edge. I mean, the miter is very tight; the edges just don't quite come together along the very front edge along the length for this one joint. (It's a complete mystery to me why all the other edges are really great.) So I'm thinking that this slight round over will cut through the open part and make a perfect tight line and look just fine. The only problem, as I see it, is that there may be a very slight showing through of a little bit of the plywood grain. Now , if I do have to go with your inlay technique, my question is : should I use the same furniture grade birch plywood in the sense of a repair, or should I go for a contrasting wood in the sense of a new design element?



