Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Steel City benchtop jointer

Posts

Re: Steel City benchtop jointer

#26

Re: If space is the consideration...

Craig Daymon

I appreciate your response John and it is a consideration, though again, I was really more curious about the tool and hearing from those that had it. That's what I put in my original post.

I have a number of planes I inherited. I also have a Hitachi power planer. I think one of the hand planes may be a jointer plane...maybe. Need to get them out of the boxes. Can't say it would hurt to work on my hand tool skills either.

I have 2 benchtops and 2.5 phenolic benchtops. I'm picking through base choices for one of the tops and that will be the workbench for where I am now. Still debating if I'll bother with a vise. The top and the base may be enough for now. I'll probably punch some holes in for 3/4" benchdogs and for the bench hooks. The half phenolic top will likely become a wing on a contractor's saw. Probably with a router table built in.

I'll probably go with the benchtop drill press, though a floor model did come in handy a couple times when I had a JET 16.5" and it doesn't eat near the floor space some other tools do.

Still, this is mostly off topic. The reviews on the Lowes site indicate the benchtop is relatively quite (a plus for neighbors sharing a wall) and seems to do what I'd expect jointer-wise from a benchtop jointer. Hopefully one of the magazines will do a review of it, or at least a short write-up in the new tools section.

-Craig