Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

What is this?

Posts

What is this?

#1

What is this?

Gary Smyth



I'm partial to pointy stuff. I found this in a abused pile of crap in a wood crate last Sunday. It was dirt cheao as the vendor thought that it was a beat up screwdriver, which it is not. This is a quality tool. It had surface rust and the point edges were dinged a little. A jeweler's file removed the niks at the point and a light coat of oil and 0000 steel wool buffed the chromed shaft. It's 16" long and the "arrowhead" edges are not sharp. The tool says rosterel germany. I can't get a "for sure" ID off of the web. Can anyone identify the maker? I have a suspicion of its use but I thought I'd ask.

Re: What is this?

#2

Re: What is this?

doug f, san clemente, ca

Don't know for sure, but it looks like a tool my grandfather used to use to repair his nets from the fishing boat he ran. Could also be used to work on thick ropes, creating loops or repairing nicks and frays.

I'm curious to see what it really is.

Doug

Re: What is this?

#3

upholstery?

Jerry Gibbs

for pulling cord through for tufting, buttons etc?

Re: What is this?

#4

Splicing fid?


Re: What is this?

#5

karl jr

Re: What is this?

karl jr

Can't help with an id, but are you sure it says "rosterel"? It may be "rostfrei", meaning rust free, i.e. stainless.

Karl

Re: What is this?

#6

Re: upholstery?

Larry

Jerry Gibbs is right that's what's for. I have a friend who did Upolstery work, and he has some.

Re: What is this?

#7

Checked again.  The i is not dotted but

Gary Smyth

it could be. Good chance. The rust stains were easily removed and could have been from the wasted other tools in the box.

Re: What is this?

#8

Re: What is this?

Randy

Looks like wire splicing tool or a fid to splice braided line.

Re: What is this?

#9

My thought is that

Gary Smyth

it is a fid for rope - the hemp kind. It would be a fairly substantial rope. I checked the West Marine catalog but they don't have anything nearly as large and all of the fids I saw there are either hollow or an elongated cone.

Upholstery is something I didn't think about. I'll check that out next.

Re: What is this?

#10

Re: What is this?

Rick Haverstock

As boat owner and sometimes line splicer, it sure looks like a fid for splicing three strand line. You use the hollow or cone type on braided line and this type of fid for the three strand.

Rick Haverstock

Re: What is this?

#11

Kneale Brownson

Is that a through hole in the end?

Kneale Brownson

Maybe a tool for working yarn through a mesh like in carpeting.

Re: What is this?

#12

karl jr

My guess is

karl jr

a needle for a thatched roof. Google "thatched roof tools" or perhaps "binding needle".

Karl

Re: What is this?

#13

Re: My guess is

Gary Camp, Bend Oregon

How big is the hole?

Re: What is this?

#14

Through hole is 3/16" x 3/8" 


Re: What is this?

#15

Not looking like a rope fid

Tom Dunlap

I've been around a lot of rope splicers who use a variety of manufactured and homemade fids to splice stranded and double-braid ropes. None of their fids look anything like this one.

Upholstery or some sort of sewing is more likely.

I'm going to send the pic to a splicer and see if he recognizes it.

Tom

Re: What is this?

#16

I Suspect

Mark Mandell - Gone Round In New Jersey

what you have is a sailmaker's needle for working with heavy canvas sails.

Re: What is this?

#17

Re: What is this?

Ralph Lipeles

It's a Sailmaker's Needle. Probably a newer one as it has a plastic handle. The ones that I have seen before have had rosewood handles.

Re: What is this?

#18

Larder?

A. Kapocius

Just a wild guess but my late dad had something like this in his arsenal as a butcher. His was used to insert strings of fat into meat to make them jucier. Any gnarled real old meat cutters care to respond?

Al Kapocius

Re: What is this?

#19

Re: What is this?

Robin Corell in Atascadero CA

I saw a tool like that in the saddle shop of the guy who mentored me in leather braidwork. Aaron used it as a stitching fid to reach up under the skirt of a saddle.

Re: What is this?

#20

Your comment made me think

Gary Smyth

of a tool used to repair tires. A strip of soft rubber is inserted in the pointed end hole and pushed through. When the shaft is withdrawn it pulls the rubber partially out where it is taken from the tool. The rest remains and seals the tire. Lots of good ideas but until I see it's brother or sister, I have no confirmation of where it belongs.

Re: What is this?

#21

I think we have a winner via the web

Gary Smyth


Under "sailmaker's needle" images the pictures were found. If you believe the description on the web it says "Sailmaker's needle, 15" circa 1840 - 1860" for the long example.

Ralph and Mark were correct - Ralph even down to the rosewood handle.

Thanks all.

Re: What is this?

#22

Perhaps

Mark Mandell - Gone Round In New Jersey

all that time before the mast was not wasted after all. :D

Re: What is this?

#23

Re: Perhaps

John McGaw

...about two years, as I recall...

Re: What is this?

#24

Actually

Mark Mandell - Gone Round In New Jersey

2 Summers; helping with restoring a sloop [not the Jon-B] ;)