Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Makita battery charger problem

Posts

Makita battery charger problem

#1

Makita battery charger problem

Gary Camp, Bend, Oregon

Good afternoon all. I couple of weeks ago I had a problem with the neutral on the electrical service panel in my shop. I had wildly fluctuating voltages for a bit. It seems that during this time my 18v Li-ion charger bit the dust. I can't see any fuses or overvoltage resets. I was wondering if anyone had ever taken one of these charges apart and found any interanl fuses or.... I sure would like to fix it and not spend 100 bucks on a new charger. I guess the lesson I learned was run the charge off of surge suppressor power strip. I ask this because I have seen fuses (nonserviceable) on electronic ballasts. I'm not ure what was being protected because when the fuse blew ya couldn't change it and the ballast ceased to function.

Thanks in advance

glc

Re: Makita battery charger problem

#2

Re: Makita battery charger problem

Jason Waters

I don't have any Makita 18V cordless. I guess you could take it apart, not much to lose I don't guess.

The other option is to buy one used, That would be better than $100.

Jason

Re: Makita battery charger problem

#3

Re: Makita battery charger problem

Ed Wozniak-Buffalo, NY

The fuse in the ballast is probably there to keep the ballast from catching on fire when certain components internal to the ballast fail.

Re: Makita battery charger problem

#4

Re: Makita battery charger problem

Larry in nw ohio

Gary I would try Ebay, you can find chargers fairly cheap on there. Good Luck Larry

Re: Makita battery charger problem

#5

Re: Makita battery charger problem

Bill White

Dumb question here....

Have ya contacted Makita?

Bill

Re: Makita battery charger problem

#6

Not a dumb question, but a dumb answer

Gary Camp, Bend, Oregon

Since there is no externareset or even external screws, I figured that Makita would tell me that it is not user serviceable and to buy a new one. I figured I would save myself a day or two and just go straight to the "Font of All Knowledge" and maybe someone would know the Super Secret, now I have to kill you trick. Since it doesn't work now I ill take it apart and see whats fried, One of the Electromagicians at work, will see if we can repair the circut board or whaever part failed. Nothing ventured nothing gained.

Re: Makita battery charger problem

#7

Re: Makita battery charger problem

Gary Camp, Bend, Oregon

Yeah, thats what I figured too. Too bad they didn't make the fuse serviceable.

Re: Makita battery charger problem

#8

Kneale Brownson

Re: Not a dumb question, but a dumb answer

Kneale Brownson

Maybe Makita would be interested in seeing what a surge did to their charger??? I'd think it would be worth a call before tearing the thing apart.

Re: Makita battery charger problem

#9

Re: Makita battery charger problem

Gary Camp, Bend, Oregon

Well, "they" actually made the charger pretty easy to fix. A VDR in line with a fuse, volts up, VDR blows and shorts to nuetral, fuse blows, the rest of the board safe. One of our electromagicians used it as a training exercise for an apprentice. I disn't spend a 100 bucks and my charger works again, I guess that means I buy a sixer of Good beer. Hard to choose which one to buy though, there are 10 or 12 micro breweries in town (pop. 80,000). That sounds kinda bad doesn't it.

glc