Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Protective finish for plywood shop floor?

Posts

Protective finish for plywood shop floor?

#1

Protective finish for plywood shop floor?

Ronster

I have about 1100 sqft of bare plywood flooring that I need to do something with before any shop equipment goes in. This needs to happen 2 weeks from now when I have a week off from work. Plywood is that crazy heavy 9/8" stuff. Walls and ceiling are drywall and painted white. Lighting is good. The building itself is somewhat high end -- brick and stone outside, metal roof on top.

The objectives for the floor are to (1) avoid ugly, (2) make it cleanable (not just sweepable but to keep any tracked-in mud out of the wood), and (3) avoid dark, light-depleting colors. I guess old-school would be to paint it gray. I'm wondering about using a water based poly such as used on hardwood floors. The ply is not pretty but perhaps it is better looking than industrial gray. Maybe a different color paint is advisable. Is there such a thing as "floor grade paint"?

Ideas? Opinions? Any "I did this" advice?

thanks,

ron

Re: Protective finish for plywood shop floor?

#2

various factors

Bill Tindall

1.According to my lighting engineer brother in law, painting the floor a light color will lessen the need for more lights overhead.

2. Some sort of finish will aid sweeping.

3. Oil based porch enamel is the hardest, most wear resistant, of the paints. It takes a week to cure to full hardness when it is warm. It leaves a finish slicker than I would want on a shop floor. This paint plus sawdust could be a hazard. There may be some epoxy product that would be better.

4. Other than the disadvantage of color, floor varnish is a good choice.

Re: Protective finish for plywood shop floor?

#3

Re: various factors

Larry in NW Ohio

Ronster I built a shop/shed about 7 years ago and I put epoxy paint down, and then covered it with the old carpeting and padding when we recarpeted the house. Of course I went around the cabinents and such so it would be more comfortable on the feet and it was free. But if I didn`t have the carpet, I would have stayed with just the paint. I didn`t think it was slippery when I didn`t have the carpet. Good Luck with whatever you end up doing.Larry

Re: Protective finish for plywood shop floor?

#4

Ellis Walentine

Depends on your expectations

Ellis Walentine

When I built my shop, I intended to paint the plywood floor, but I only got as far as priming it, and it has held up pretty darn well for lo these past 12 years. Sweeping is quite easy, and the light color of the primer does brighten the shop, although it's not as aesthetically pleasing as the medium blue-gray paint I had originally intended.

My reference to your expectations had to do with how pristine and protected you want this floor. Most shop floors get a lot of glue and finish dripped on them, depending on your work habits. I only ever worried about the most egregious of these. If you want a floor that can be mopped clean, you probably want floor enamel or epoxy garage paint, or you could use polyurethane over a coat of regular paint.

Ellis Walentine, Host

Re: Protective finish for plywood shop floor?

#5

Re: Protective finish for plywood shop floor?

john Veerkamp

Second floor & porch enamel. Comes in a variety of colors.

Re: Protective finish for plywood shop floor?

#6

Re: Protective finish for plywood shop floor?

Paul Leuba

I have had very good luck using Ace Hardware polyurethane paint on my concrete basement floor. It's very tough and they will mix any color you want. A very light gray would be my preference for a shop floor. Light enought to provide good reflective light without the glare of a white floor.

Paul in Hunt Valley, MD

Re: Protective finish for plywood shop floor?

#7

JL

Re: Protective finish for plywood shop floor?

JL

My floor is concrete. I used a paint with epoxy fibers. It has held up well. My friend Mike has an "Advantek" floor (plywood). He painted his floor with a similar product. It worked well for him He ended up tinting his paint a different color.

Re: Protective finish for plywood shop floor?

#8

Anyone with a paint product line to recommend?

ronster

"Pristine" and mopping wouldn't be a good idea for me, but I would like to have a relatively water repellent floor for future cleaning.

Maybe I'll look into the "porch and floor" paints and their primer suggestions.

Anyone with a particular product line to recommend?

Re: Protective finish for plywood shop floor?

#9

Re: Anyone with a paint product line to recommend?

Bill Tindall

No, but I was told by a paint chemist that the oil based products are more durable than the latex porch and floor paints. I got mine at Glidden and painted the deck of a flat bed trailer with it. It took 2 weeks to cure but it cured hard and has held up outdoors.

Re: Protective finish for plywood shop floor?

#10

saw dust on ply-wood  Not me like ice skating


Re: Protective finish for plywood shop floor?

#11

Re: saw dust on ply-wood  Not me like ice skating

mdclor

If you decide to paint your floor and want to avoid slipperiness caused by sawdust, you could try mixing a little sand into your paint before you apply it to the plywood. This will not work if you want to spray the paint however. :D